Durability and Microstructural Evaluation of Geopolymer Mortars Exposed to Sulphuric Acid Using Industrial By-Product Fillers
Polymers · 26.08.2025 · 17 (17) · 2310
DOI: 10.3390/polym17172310 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.08.2025. Verfasst von Ouiame Chakkor. Beteiligte Einrichtung: Civil Engineering Department, Faculty of Engineering, İstanbul Aydın University, İstanbul 34295, Turkey. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Rapid urbanization and industrialization have increased atmospheric pollution, particularly via sulfur oxides (SOx) that form sulfuric acid and accelerate the degradation of cementitious materials. While Portland-cement systems have been widely studied, less is known about the acid resistance of geopolymer mortars. This study investigates the durability and microstructural evolution of metakaolin–red mud geopolymer mortars incorporating limestone, marble, and basalt powders as partial sand replacements (5, 10, and 15 wt %). Specimens were immersed in 3% H2SO4 for 30, 60, and 90 days, with performance evaluated via compressive and flexural strength, weight loss, and ultrasonic pulse velocity (UPV), alongside scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). After 90 days, the optimal basalt-filled mix (15 wt %) retained 84% of its initial compressive strength (46.8 MPa), compared with 61% for the control; mass loss decreased from 6.4% (control) to 3.2%, and UPV degradation was reduced by 35%. Microstructural analyses indicate denser gel phases and reduced microcracking in basalt- and marble-filled mixes. These results demonstrate that industrial by-product fillers can significantly improve sulfuric-acid resistance while supporting more sustainable binder technology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Civil Engineering Department, Faculty of Engineering, İstanbul Aydın University, İstanbul 34295, Turkey.
ORCID-Profile: Ouiame Chakkor
Zitieren
APA
Chakkor, O. (2025). Durability and Microstructural Evaluation of Geopolymer Mortars Exposed to Sulphuric Acid Using Industrial By-Product Fillers. Polymers, 17(17), 2310. https://doi.org/10.3390/polym17172310
Vancouver
Chakkor O. Durability and Microstructural Evaluation of Geopolymer Mortars Exposed to Sulphuric Acid Using Industrial By-Product Fillers. Polymers. 2025;17(17):2310. doi:10.3390/polym17172310
BibTeX
@article{Chakkor2025,
author = {Chakkor, Ouiame},
title = {Durability and Microstructural Evaluation of Geopolymer Mortars Exposed to Sulphuric Acid Using Industrial By-Product Fillers},
journal = {Polymers},
year = {2025},
volume = {17},
number = {17},
pages = {2310},
doi = {10.3390/polym17172310}
}
EUVIMED