Structure, Mechanical Properties, and Rheological Characteristics of Poly(Butylene Adipate-co-Terephthalate)–Polylactic Acid Blends Modified via In Situ Maleic Anhydride Grafting
Polymers · 21.08.2025 · 17 (16) · 2264
DOI: 10.3390/polym17162264 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.08.2025. Verfasst von Min Jin und 9 weiteren Autor:innen. Beteiligte Einrichtung: Fujian Dazhuang Bamboo Industry Technology Co., Ltd., Jian'ou 353100, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Longjiang Science and Technology Talent Spring Goose Support Program, Young Elite Scientist Sponsorship Program by Heilongjiang Province, Collaborative Innovation Project of First-Class Disciplines in Heilongjiang Province.
Abstract (Originalsprache)
Polylactic acid (PLA) materials face inherent limitations in many applications due to their low toughness. To address this challenge, this study employed a reactive melt-grafting method to prepare maleic anhydride (MA)-grafted poly(butylene adipate-co-terephthalate) (PBAT–MA), providing an effective approach to improve the interfacial compatibility between PLA and PBAT, thereby significantly enhancing the toughness and impact resistance of PLA and expanding its application scope. The grafting reaction process of PBAT–MA was investigated, as well as its toughening mechanism and effect on PLA. The results showed that at a maleic anhydride concentration of 2 wt%, the obtained PLA–PBAT–MA composite material exhibited the best performance, with a fracture elongation of 358.1%, 450.4% higher than that of the unmodified composite material. The impact strength was 333.9 kJ/m2, 917.3% higher than that of the unmodified composite material. This enhanced effect is attributed to the optimal MA concentration preserving the tough structure of PBAT while effectively bridging the interface between PLA and PBAT, promoting efficient stress transfer between the two phases, and ultimately achieving exceptional toughness.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fujian Dazhuang Bamboo Industry Technology Co., Ltd., Jian'ou 353100, China.
- State Key Laboratory of Woody Oil Resources Utilization, Northeast Forestry University, Harbin 150040, China.
- College of Home and Art Design, Northeast Forestry University, Harbin 150040, China.
ORCID-Profile: Jianfeng Zhan, Yanhua Zhang
Förderung
- Longjiang Science and Technology Talent Spring Goose Support Program
- Young Elite Scientist Sponsorship Program by Heilongjiang Province
- Collaborative Innovation Project of First-Class Disciplines in Heilongjiang Province
- Central Government Finance Forestry Science and Technology Promotion Demonstration Project
- Young Elite Scientist Sponsorship Program of Heilongjiang Province
Zitieren
APA
Jin, M., Qi, B., Chen, K., Cao, L., Chen, P., Sun, C., Zhan, J., Shao, Z., Tan, H., & Zhang, Y. (2025). Structure, Mechanical Properties, and Rheological Characteristics of Poly(Butylene Adipate-co-Terephthalate)–Polylactic Acid Blends Modified via In Situ Maleic Anhydride Grafting. Polymers, 17(16), 2264. https://doi.org/10.3390/polym17162264
Vancouver
Jin M, Qi B, Chen K, Cao L, Chen P, Sun C, et al. Structure, Mechanical Properties, and Rheological Characteristics of Poly(Butylene Adipate-co-Terephthalate)–Polylactic Acid Blends Modified via In Situ Maleic Anhydride Grafting. Polymers. 2025;17(16):2264. doi:10.3390/polym17162264
BibTeX
@article{Jin2025,
author = {Jin, Min and Qi, Bei and Chen, Kang and Cao, Lijun and Chen, Pengrui and Sun, Ce and Zhan, Jianfeng and Shao, Zhuofeng and Tan, Haiyan and Zhang, Yanhua},
title = {Structure, Mechanical Properties, and Rheological Characteristics of Poly(Butylene Adipate-co-Terephthalate)–Polylactic Acid Blends Modified via In Situ Maleic Anhydride Grafting},
journal = {Polymers},
year = {2025},
volume = {17},
number = {16},
pages = {2264},
doi = {10.3390/polym17162264}
}
EUVIMED