EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Underfill: A Review of Reliability Improvement Methods in Electronics Production

Zbyněk Plachý iD, Anna Pražanová iD, Karel Dušek, Attila Géczy iD

Polymers · 13.08.2025 · 17 (16) · 2206

DOI: 10.3390/polym17162206 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 13.08.2025. Verfasst von Zbyněk Plachý und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrotechnology, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 1902/2, 166 27 Prague, Czech Repu…. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 142 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Grant Agency of the Czech Technical University in Prague.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing integration and miniaturization of electronic devices place serious pressure on packaging technologies to ensure long-term reliability. Polymer underfill encapsulation is a key process for reducing thermomechanical stress in modern assemblies. A systematic analysis that frames its diverse methods as solutions to the fundamental trade-off between the final polymer composite’s thermomechanical performance and its liquid-state processability is lacking from the literature. The novelty of this review lies in establishing a decision-making framework that connects specific application requirements to the underlying material science and process limitations. This article analyzes and compares different underfill techniques through a systematic literature review, from conventional capillary flow to advanced wafer-level underfills. Our findings show that this core trade-off leads to three distinct strategies: (1) Maximum reliability: This is achieved with highly filled, post-applied composites, offering excellent thermomechanical properties at the cost of slow, viscosity-driven manufacturing speeds. (2) High productivity: This is realized through integrated, pre-applied processes that simplify manufacturing but impose significant constraints on the polymer chemistry and filler content. (3) Targeted reinforcement for board-level packages: At the localized positions applied, ductile polymers often enhance mechanical shock resistance. This review concludes that the optimal underfill choice is not universal but is a complex, application-driven decision balancing the cured material’s performance against the processing demands of the polymer system.

Schlagwörter

Stichwörter der Autor:innen

BGAICPCBencapsulationflip chipreliabilityunderfill

Autor:innen und Institutionen

  • Department of Electrotechnology, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 1902/2, 166 27 Prague, Czech Republic.
  • Department of Electronics Technology, Faculty of Electrical Engineering and Informatics, Budapest University of Technology and Economics, H-1111 Budapest, Hungary.

ORCID-Profile: Zbyněk Plachý, Anna Pražanová, Attila Géczy

Förderung

  • Grant Agency of the Czech Technical University in Prague

Zitieren

APA

Plachý, Z., Pražanová, A., Dušek, K., & Géczy, A. (2025). Underfill: A Review of Reliability Improvement Methods in Electronics Production. Polymers, 17(16), 2206. https://doi.org/10.3390/polym17162206

Vancouver

Plachý Z, Pražanová A, Dušek K, Géczy A. Underfill: A Review of Reliability Improvement Methods in Electronics Production. Polymers. 2025;17(16):2206. doi:10.3390/polym17162206

BibTeX
@article{Plach2025,
  author = {Plachý, Zbyněk and Pražanová, Anna and Dušek, Karel and Géczy, Attila},
  title = {Underfill: A Review of Reliability Improvement Methods in Electronics Production},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {16},
  pages = {2206},
  doi = {10.3390/polym17162206}
}
Kostenlos starten →