Enhancing the Mechanical Properties of Sulfur-Modified Fly Ash/Metakaolin Geopolymers with Polypropylene Fibers
Polymers · 31.07.2025 · 17 (15) · 2119
DOI: 10.3390/polym17152119 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.07.2025. Verfasst von Sergey A Stel'makh und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.
Abstract (Originalsprache)
High demand for sustainable solutions in the construction industry determines the significant relevance of developing new eco-friendly composites with a reduced carbon impact on the environment. The main aim of this study is to investigate the possibility and efficiency of using technical sulfur (TS) as a modifying additive for geopolymer composites and to select the optimal content of polypropylene fiber (PF). To assess the potential of TS, experimental samples of geopolymer solutions based on metakaolin and fly ash were prepared. The TS content varied from 0% to 9% by weight of binder in 3% increments. In the first stage, the density, compressive and flexural strength, capillary water absorption and microstructure of hardened geopolymer composites were tested. The TS additive in an amount of 3% was the most effective and provided an increase in compressive strength by 12.6%, flexural strength by 12.8% and a decrease in capillary water absorption by 18.2%. At the second stage, the optimal PF content was selected, which was 0.75%. The maximum increases in strength properties were recorded for the composition with 3% TS and 0.75% PF: 8% for compression and 32.6% for bending. Capillary water absorption decreased by 12.9%. The geopolymer composition developed in this work, modified with TP and PF, has sufficient mechanical and physical properties and can be considered for further study in order to determine its competitiveness with cement composites in real construction practice.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia.
- Department of Engineering Geometry and Computer Graphics, Don State Technical University, 344003 Rostov-on-Don, Russia.
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia.
ORCID-Profile: Sergey A Stel'makh, Evgenii M Shcherban', Alexey N Beskopylny, Alexandr A Shilov, Irina Razveeva, Anastasia Pogrebnyak, Andrei Chernil'nik, Diana Elshaeva
Förderung
- Russian Science Foundation
Zitieren
APA
Stel'makh, S. A., Shcherban', E. M., Beskopylny, A. N., Mailyan, L. R., Shilov, A. A., Razveeva, I., Oganesyan, S., Pogrebnyak, A., Chernil'nik, A., & Elshaeva, D. (2025). Enhancing the Mechanical Properties of Sulfur-Modified Fly Ash/Metakaolin Geopolymers with Polypropylene Fibers. Polymers, 17(15), 2119. https://doi.org/10.3390/polym17152119
Vancouver
Stel'makh SA, Shcherban' EM, Beskopylny AN, Mailyan LR, Shilov AA, Razveeva I, et al. Enhancing the Mechanical Properties of Sulfur-Modified Fly Ash/Metakaolin Geopolymers with Polypropylene Fibers. Polymers. 2025;17(15):2119. doi:10.3390/polym17152119
BibTeX
@article{Stelmakh2025,
author = {Stel'makh, Sergey A and Shcherban', Evgenii M and Beskopylny, Alexey N and Mailyan, Levon R and Shilov, Alexandr A and Razveeva, Irina and Oganesyan, Samson and Pogrebnyak, Anastasia and Chernil'nik, Andrei and Elshaeva, Diana},
title = {Enhancing the Mechanical Properties of Sulfur-Modified Fly Ash/Metakaolin Geopolymers with Polypropylene Fibers},
journal = {Polymers},
year = {2025},
volume = {17},
number = {15},
pages = {2119},
doi = {10.3390/polym17152119}
}
EUVIMED