EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Active Packaging Based on Hydroxypropyl Methyl Cellulose/Fungal Chitin Nanofibers Films for Controlled Release of Ferulic Acid

Gustavo Cabrera-Barjas iD, Maricruz González, Sergio Benavides-Valenzuela, Ximena Preza, Yeni A Paredes-Padilla, Patricia Castaño-Rivera, Rodrigo Segura iD, Esteban F Durán-Lara iD, Aleksandra Nesic iD

Polymers · 31.07.2025 · 17 (15) · 2113

DOI: 10.3390/polym17152113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 31.07.2025. Verfasst von Gustavo Cabrera-Barjas und 8 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ciencias de la Rehabilitación y Calidad de Vida, Escuela de Nutrición y Dietética, Universidad San Sebastián Campus Las Tres Pascualas, L…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ANID Fondecyt Regular, FOVI, Vicerectoria de Investigación Universidad San Sebastian.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, active packaging has become a focal point of research and development in the food industry, driven by increasing consumer demand for safe, high-quality, and sustainable food products. In this work, solvent casting processed an active antibacterial multicomponent film based on hydroxypropyl methylcellulose incorporated with ferulic acid and chitin nanofibers. The influences of ferulic acid and different content of chitin nanofibers on the structure, thermal, mechanical, and water vapor stability and antioxidant and antibacterial efficiency of films were studied. It was shown that the inclusion of only ferulic acid did not significantly influence the mechanical, water vapor, and thermal stability of films. In addition, films containing only ferulic acid did not display antibacterial activity. The optimal concentration of chitin nanofibers in hydroxypropyl methylcellulose–ferulic acid films was 5 wt%, providing a tensile strength of 15 MPa, plasticity of 52%, and water vapor permeability of 0.94 × 10−9 g/m s Pa. With further increase of chitin nanofibers content, films with layered and discontinuous phases are obtained, which negatively influence tensile strength and water vapor permeability. Moreover, only films containing both ferulic acid and chitin nanofibers demonstrated antibacterial activity toward E. coli and S. aureus, suggesting that the presence of fibers allows easier release of ferulic acid from the matrix. These results imply that the investigated three-component systems have potential applicability as sustainable active food packaging materials.

Schlagwörter

Stichwörter der Autor:innen

active packagingantimicrobial activitycellulose filmsfungal chitin nanofibers

Autor:innen und Institutionen

  • Facultad de Ciencias de la Rehabilitación y Calidad de Vida, Escuela de Nutrición y Dietética, Universidad San Sebastián Campus Las Tres Pascualas, Lientur 1457, Concepción 4080871, Chile.
  • Facultad de Ciencias Químicas, Universidad Veracruzana, Xalapa 91000, Mexico.
  • Unidad de Desarrollo Tecnológico (UDT), Universidad de Concepción, Parque Industrial Coronel, Av. Cordillera 2634, Coronel 4191996, Chile.
  • Instituto de Química y Bioquímica, Facultad de Ciencias, Universidad de Valparaíso, Valparaíso 2362735, Chile.
  • Laboratory of Bio & Nano Materials, Drug Delivery and Controlled Release, Department of Microbiology, Faculty of Health Sciences, University of Talca, Talca 3460000, Chile.
  • Vinca Institute for Nuclear Sciences, National Institute of Republic of Serbia, University of Belgrade, Mike Petrovica Alasa 12-14, 11000 Belgrade, Serbia.

ORCID-Profile: Gustavo Cabrera-Barjas, Rodrigo Segura, Esteban F Durán-Lara, Aleksandra Nesic

Förderung

  • ANID Fondecyt Regular
  • FOVI
  • Vicerectoria de Investigación Universidad San Sebastian
  • Proyecto Fondequip
  • Ministry of Education, Science and Technological Development of the Republic of Serbia

Zitieren

APA

Cabrera-Barjas, G., González, M., Benavides-Valenzuela, S., Preza, X., Paredes-Padilla, Y. A., Castaño-Rivera, P., Segura, R., Durán-Lara, E. F., & Nesic, A. (2025). Active Packaging Based on Hydroxypropyl Methyl Cellulose/Fungal Chitin Nanofibers Films for Controlled Release of Ferulic Acid. Polymers, 17(15), 2113. https://doi.org/10.3390/polym17152113

Vancouver

Cabrera-Barjas G, González M, Benavides-Valenzuela S, Preza X, Paredes-Padilla YA, Castaño-Rivera P, et al. Active Packaging Based on Hydroxypropyl Methyl Cellulose/Fungal Chitin Nanofibers Films for Controlled Release of Ferulic Acid. Polymers. 2025;17(15):2113. doi:10.3390/polym17152113

BibTeX
@article{CabreraBarjas2025,
  author = {Cabrera-Barjas, Gustavo and González, Maricruz and Benavides-Valenzuela, Sergio and Preza, Ximena and Paredes-Padilla, Yeni A and Castaño-Rivera, Patricia and Segura, Rodrigo and Durán-Lara, Esteban F and Nesic, Aleksandra},
  title = {Active Packaging Based on Hydroxypropyl Methyl Cellulose/Fungal Chitin Nanofibers Films for Controlled Release of Ferulic Acid},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2113},
  doi = {10.3390/polym17152113}
}
Kostenlos starten →