Sustainable Rubber Solutions: A Study on Bio-Based Oil and Resin Blends
Polymers · 31.07.2025 · 17 (15) · 2111
DOI: 10.3390/polym17152111 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.07.2025. Verfasst von Frances van Elburg und 6 weiteren Autor:innen. Beteiligte Einrichtung: Elastomer Technology & Engineering, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twe…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
One of the most important challenges the tire industry faces is becoming carbon-neutral and using 100% sustainable materials by 2050. Utilizing materials from renewable sources and recycled substances is a key aspect of achieving this goal. Petroleum-based oils, such as Treated Distillate Aromatic Extract (TDAE), are frequently used in rubber compounds, and a promising strategy to enhance sustainability is to use bio-based plasticizer alternatives. However, research has shown that the replacement of TDAE oil with bio-based oils or resins can significantly alter the glass transition temperature (Tg) of the final compound, influencing the tire properties. In this study, the theory was proposed that using a plasticizer blend, comprising oil and resin, in a rubber compound would result in similar Tg values as the reference compound containing TDAE. To test this, the cycloaliphatic di-ester oil Hexamoll DINCH, which can be made out of bio-based feedstock by the BioMass Balance approach, was selected and blended with the cycloaliphatic hydrocarbon resin Escorez 5300. Various oil-to-resin ratios were investigated, and a linear increase in the Tg of the vulcanizate was obtained when increasing the resin content and decreasing the oil content. Additionally, a 50/50 blend, consisting of 18.75 phr Hexamoll DINCH and 18.75 phr Escorez 5300, resulted in the same Tg of −19 °C as a compound containing 37.5 phr TDAE. Furthermore, this blend resulted in similar curing characteristics and cured Payne effect as the reference with TDAE. Moreover, a similar rolling resistance indicator (tan δ at 60 °C = 0.115), a slight deterioration in wear resistance (ARI = 83%), but an improvement in the stress–strain behavior (M300 = 9.18 ± 0.20 MPa and Ts = 16.3 ± 0.6 MPa) and wet grip indicator (tan δ at 0 °C = 0.427) were observed. The results in this work show the potential of finding a balance between optimal performance and sustainability by using plasticizer blends.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Elastomer Technology & Engineering, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente, Drienerlolaan 5, 7522 NB Enschede, The Netherlands.
- Bridgestone EU NV/SA, Italian Branch-Technical Center, Via del Fosso del Salceto 13/15, 00128 Rome, Italy.
ORCID-Profile: Frances van Elburg, Auke Talma, Pilar Bernal-Ortega
Zitieren
APA
van Elburg, F., Grunert, F., Aurisicchio, C., di Consiglio, M., Talma, A., Bernal-Ortega, P., & Blume, A. (2025). Sustainable Rubber Solutions: A Study on Bio-Based Oil and Resin Blends. Polymers, 17(15), 2111. https://doi.org/10.3390/polym17152111
Vancouver
van Elburg F, Grunert F, Aurisicchio C, di Consiglio M, Talma A, Bernal-Ortega P, et al. Sustainable Rubber Solutions: A Study on Bio-Based Oil and Resin Blends. Polymers. 2025;17(15):2111. doi:10.3390/polym17152111
BibTeX
@article{vanElburg2025,
author = {van Elburg, Frances and Grunert, Fabian and Aurisicchio, Claudia and di Consiglio, Micol and Talma, Auke and Bernal-Ortega, Pilar and Blume, Anke},
title = {Sustainable Rubber Solutions: A Study on Bio-Based Oil and Resin Blends},
journal = {Polymers},
year = {2025},
volume = {17},
number = {15},
pages = {2111},
doi = {10.3390/polym17152111}
}
EUVIMED