EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Evaluation of Mesoporous SiO2 Nanoparticle-Based Sustained-Release Gel Breaker for Clean Fracturing Fluids

Guiqiang Fei, Banghua Liu, Liyuan Guo, Yuan Chang, Boliang Xue

Polymers · 30.07.2025 · 17 (15) · 2078

DOI: 10.3390/polym17152078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.07.2025. Verfasst von Guiqiang Fei und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address critical technical challenges in coalbed methane fracturing, including the uncontrollable release rate of conventional breaker agents and incomplete gel breaking, this study designs and fabricates an intelligent controlled-release breaker system based on paraffin-coated mesoporous silica nanoparticle carriers. Three types of mesoporous silica (MSN) carriers with distinct pore sizes are synthesized via the sol-gel method using CTAB, P123, and F127 as structure-directing agents, respectively. Following hydrophobic modification with octyltriethoxysilane, n-butanol breaker agents are loaded into the carriers, and a temperature-responsive controlled-release system is constructed via paraffin coating technology. The pore size distribution was analyzed by the BJH model, confirming that the average pore diameters of CTAB-MSNs, P123-MSNs, and F127-MSNs were 5.18 nm, 6.36 nm, and 6.40 nm, respectively. The BET specific surface areas were 686.08, 853.17, and 946.89 m2/g, exhibiting an increasing trend with the increase in pore size. Drug-loading performance studies reveal that at the optimal loading concentration of 30 mg/mL, the loading efficiencies of n-butanol on the three carriers reach 28.6%, 35.2%, and 38.9%, respectively. The release behavior study under simulated reservoir temperature conditions (85 °C) reveals that the paraffin-coated system exhibits a distinct three-stage release pattern: a lag phase (0–1 h) caused by paraffin encapsulation, a rapid release phase (1–8 h) induced by high-temperature concentration diffusion, and a sustained release phase (8–30 h) attributed to nano-mesoporous characteristics. This intelligent controlled-release breaker demonstrates excellent temporal compatibility with coalbed methane fracturing processes, providing a novel technical solution for the efficient and clean development of coalbed methane.

Schlagwörter

Stichwörter der Autor:innen

coalbed methanecontrolled-release breakerfracturing fluidmesoporous silicaparaffin coating

Autor:innen und Institutionen

  • College of Chemistry and Chemical Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Fei, G., Liu, B., Guo, L., Chang, Y., & Xue, B. (2025). Development and Evaluation of Mesoporous SiO2 Nanoparticle-Based Sustained-Release Gel Breaker for Clean Fracturing Fluids. Polymers, 17(15), 2078. https://doi.org/10.3390/polym17152078

Vancouver

Fei G, Liu B, Guo L, Chang Y, Xue B. Development and Evaluation of Mesoporous SiO2 Nanoparticle-Based Sustained-Release Gel Breaker for Clean Fracturing Fluids. Polymers. 2025;17(15):2078. doi:10.3390/polym17152078

BibTeX
@article{Fei2025,
  author = {Fei, Guiqiang and Liu, Banghua and Guo, Liyuan and Chang, Yuan and Xue, Boliang},
  title = {Development and Evaluation of Mesoporous SiO2 Nanoparticle-Based Sustained-Release Gel Breaker for Clean Fracturing Fluids},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2078},
  doi = {10.3390/polym17152078}
}
Kostenlos starten →