EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Antimicrobial and Physicochemical Properties of Hemicellulose-Based Films Incorporating Carvacrol

Syed Ammar Hussain iD, Brajendra K Sharma iD, Phoebe X Qi iD, Madhav P Yadav iD, Tony Z Jin iD

Polymers · 29.07.2025 · 17 (15) · 2073

DOI: 10.3390/polym17152073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.07.2025. Verfasst von Syed Ammar Hussain und 4 weiteren Autor:innen. Beteiligte Einrichtung: Eastern Regional Research Center, Agricultural Research Service, U.S. Department of Agriculture, 600 E, Mermaid Lane, Wyndmoor, PA 19038, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Agriculture.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Antimicrobial food packaging with natural antimicrobials and biodegradable polymers presents an innovative solution to mitigate microbial contamination, prolong freshness, reduce food waste, and alleviate environmental burden. This study developed antimicrobial hemicellulose-based films by incorporating carvacrol (1% and 2%) as a natural antimicrobial agent through micro-emulsification produced by high-pressure homogenization (M-films). For comparison, films with the same formula were constructed using coarse emulsions (C-films) without high-pressure homogenization. These films were investigated for their antimicrobial efficacy, mechanical and barrier properties, and physicochemical attributes to explore their potential as sustainable antimicrobial packaging solutions. The M-films demonstrated superior antimicrobial activity, achieving reductions exceeding 4 Log CFU/mL against Listeria monocytogenes, Escherichia coli, and Salmonella enterica, compared to the C-films. High-pressure homogenization significantly reduced the emulsion’s particle size, from 11.59 to 2.55 μm, and considerably enhanced the M-film’s uniformity, hydrophobicity, and structural quality. Most importantly, the M-films exhibited lower oxygen transmission (35.14 cc/m2/day) and water vapor transmission rates (52.12 g/m2/day) than the C-films at 45.1 and 65.5 cc/m2/day, respectively, indicating superior protection against gas and moisture diffusion. Markedly improved mechanical properties, including foldability, toughness, and bubble-free surfaces, were also observed, making the M-films suitable for practical applications. This study highlights the potential of high-pressure homogenization as a method for enhancing the functional properties of hemicellulose-based films (i.e., M-films). The fabricated films offer a viable alternative to conventional plastic packaging, paving the way for safer and greener solutions tailored to modern industry needs.

Schlagwörter

Stichwörter der Autor:innen

antimicrobial packagingbio-based filmsfood safetygas and moisture barrier propertieshigh-pressure homogenizationmicro-emulsions

Autor:innen und Institutionen

  • Eastern Regional Research Center, Agricultural Research Service, U.S. Department of Agriculture, 600 E, Mermaid Lane, Wyndmoor, PA 19038, USA.

ORCID-Profile: Syed Ammar Hussain, Brajendra K Sharma, Phoebe X Qi, Madhav P Yadav, Tony Z Jin

Förderung

  • U.S. Department of Agriculture

Zitieren

APA

Hussain, S. A., Sharma, B. K., Qi, P. X., Yadav, M. P., & Jin, T. Z. (2025). Antimicrobial and Physicochemical Properties of Hemicellulose-Based Films Incorporating Carvacrol. Polymers, 17(15), 2073. https://doi.org/10.3390/polym17152073

Vancouver

Hussain SA, Sharma BK, Qi PX, Yadav MP, Jin TZ. Antimicrobial and Physicochemical Properties of Hemicellulose-Based Films Incorporating Carvacrol. Polymers. 2025;17(15):2073. doi:10.3390/polym17152073

BibTeX
@article{Hussain2025,
  author = {Hussain, Syed Ammar and Sharma, Brajendra K and Qi, Phoebe X and Yadav, Madhav P and Jin, Tony Z},
  title = {Antimicrobial and Physicochemical Properties of Hemicellulose-Based Films Incorporating Carvacrol},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2073},
  doi = {10.3390/polym17152073}
}
Kostenlos starten →