EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Experimental–Machine Learning Study on the Mechanical Behavior of Polymer Composite Structures Fabricated via FDM

Osman Ulkir iD, Sezgin Ersoy iD

Polymers · 23.07.2025 · 17 (15) · 2012

DOI: 10.3390/polym17152012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.07.2025. Verfasst von Osman Ulkir und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electric and Energy, Mus Alparslan University, Mus 49210, Türkiye. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the mechanical behavior of polymer and composite specimens fabricated using fused deposition modeling (FDM), focusing on three material configurations: acrylonitrile butadiene styrene (ABS), carbon fiber-reinforced polyphthalamide (PPA/Cf), and a sandwich-structured composite. A systematic experimental plan was developed using the Box–Behnken design (BBD) to investigate the effects of material type (MT), infill pattern (IP), and printing direction (PD) on tensile and flexural strength. Experimental results showed that the PPA/Cf material with a “Cross” IP printed “Flat” yielded the highest mechanical performance, achieving a tensile strength of 75.8 MPa and a flexural strength of 102.3 MPa. In contrast, the lowest values were observed in ABS parts with a “Grid” pattern and “Upright” orientation, recording 37.8 MPa tensile and 49.5 MPa flexural strength. Analysis of variance (ANOVA) results confirmed that all three factors significantly influenced both outputs (p < 0.001), with MT being the most dominant factor. Machine learning (ML) algorithms, Bayesian linear regression (BLR), and Gaussian process regression (GPR) were employed to predict mechanical performance. GPR achieved the best overall accuracy with R2 = 0.9935 and MAPE = 11.14% for tensile strength and R2 = 0.9925 and MAPE = 12.96% for flexural strength. Comparatively, the traditional BBD yielded slightly lower performance with MAPE = 13.02% and R2 = 0.9895 for tensile strength. Validation tests conducted on three unseen configurations clearly demonstrated the generalization capability of the models. Based on actual vs. predicted values, the GPR yielded the lowest average prediction errors, with MAPE values of 0.54% for tensile and 0.45% for flexural strength. In comparison, BLR achieved 0.79% and 0.60%, while BBD showed significantly higher errors at 1.76% and 1.32%, respectively.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfused deposition modelingmachine learningmechanical behaviorpolymer composite

Autor:innen und Institutionen

  • Department of Electric and Energy, Mus Alparslan University, Mus 49210, Türkiye.
  • Ersoy Advanced Research in Mechatronics and Artificial Intelligence, Marmara University, Istanbul 34722, Türkiye.
  • Institute of Microtechnology, Technische Universität Braunschweig, 38124 Braunschweig, Germany.

ORCID-Profile: Osman Ulkir, Sezgin Ersoy

Zitieren

APA

Ulkir, O., & Ersoy, S. (2025). Hybrid Experimental–Machine Learning Study on the Mechanical Behavior of Polymer Composite Structures Fabricated via FDM. Polymers, 17(15), 2012. https://doi.org/10.3390/polym17152012

Vancouver

Ulkir O, Ersoy S. Hybrid Experimental–Machine Learning Study on the Mechanical Behavior of Polymer Composite Structures Fabricated via FDM. Polymers. 2025;17(15):2012. doi:10.3390/polym17152012

BibTeX
@article{Ulkir2025,
  author = {Ulkir, Osman and Ersoy, Sezgin},
  title = {Hybrid Experimental–Machine Learning Study on the Mechanical Behavior of Polymer Composite Structures Fabricated via FDM},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2012},
  doi = {10.3390/polym17152012}
}
Kostenlos starten →