EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bending-Induced Progressive Damage of 3D-Printed Sandwich-Structured Composites by Non-Destructive Testing

Lianhua Ma iD, Heng Sun, Xu Dong, Zhenyue Liu, Biao Wang

Polymers · 15.07.2025 · 17 (14) · 1936

DOI: 10.3390/polym17141936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.07.2025. Verfasst von Lianhua Ma und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Interdisciplinary Science & School of Materials Science and Engineering, Dongguan University of Technology, Dongguan 523808, Ch…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the extensive application of 3D-printed composites across multiple industries, the investigation into their structural reliability under complex loading conditions has become a critical research focus. This study comprehensively employs acoustic emission (AE) monitoring, digital image correlation (DIC) measurement, and micro-computed tomography (Micro-CT) visualization techniques to explore the progressive damage behavior of 3D-printed sandwich-structured composites reinforced with continuous carbon fiber sheets under three-point bending. Mechanical tests show that increasing the fiber content of face sheets from 10% to 20% enhances average bending strength by 56%, while low fiber content compromises stiffness and load-bearing capacity. AE analysis categorizes damage modes into matrix cracking (150 kHz) using k-means clustering algorithms. DIC measurement reveals significant structural deformation processes during damage progression. The AE-DIC-Micro-CT combination demonstrates an initial undamaged state, followed by damage initiation and propagation in the subsequent stages. This integrated approach provides an effective method for damage assessment, guiding the design and reliability improvement of 3D-printed composites.

Schlagwörter

Stichwörter der Autor:innen

acoustic emissionclustering analysisfiber reinforced polymermicro-CTsandwich structures

Autor:innen und Institutionen

  • Research Institute of Interdisciplinary Science & School of Materials Science and Engineering, Dongguan University of Technology, Dongguan 523808, China.
  • School of Quality and Technical Supervision, Hebei University, Baoding 071002, China.
  • School of Physics and Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Guangzhou 510275, China.

ORCID-Profile: Lianhua Ma

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ma, L., Sun, H., Dong, X., Liu, Z., & Wang, B. (2025). Bending-Induced Progressive Damage of 3D-Printed Sandwich-Structured Composites by Non-Destructive Testing. Polymers, 17(14), 1936. https://doi.org/10.3390/polym17141936

Vancouver

Ma L, Sun H, Dong X, Liu Z, Wang B. Bending-Induced Progressive Damage of 3D-Printed Sandwich-Structured Composites by Non-Destructive Testing. Polymers. 2025;17(14):1936. doi:10.3390/polym17141936

BibTeX
@article{Ma2025,
  author = {Ma, Lianhua and Sun, Heng and Dong, Xu and Liu, Zhenyue and Wang, Biao},
  title = {Bending-Induced Progressive Damage of 3D-Printed Sandwich-Structured Composites by Non-Destructive Testing},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {14},
  pages = {1936},
  doi = {10.3390/polym17141936}
}
Kostenlos starten →