Titanate-Coupled Aluminum as an Interfacial Modifier for Enhanced Thermal and Mechanical Performance in Hybrid Epoxy Composites
Polymers · 11.07.2025 · 17 (14) · 1922
DOI: 10.3390/polym17141922 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.07.2025. Verfasst von Hai-Long Cheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Materials, Jilin Institute of Chemical Technology, Jilin 132022, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF), Commercialization Promotion Agency for R&D Outcomes (COMPA) grant, Korea Energy.
Abstract (Originalsprache)
Thermally conductive polymer composites are essential for effective heat dissipation in electronic packaging, where both thermal management and mechanical reliability are critical. Although diglycidyl ether of bisphenol-A (DGEBA)-based epoxies exhibit favorable properties, their intrinsically low thermal conductivity limits broader applications. Incorporating conductive fillers, such as expanded graphite (EG) and metal powders, enhances heat transport but often compromises mechanical strength due to poor filler–matrix compatibility. In this study, we address this trade-off by employing a titanate coupling agent to surface-modify aluminum (Al) fillers, thereby improving interfacial adhesion and dispersion within the DGEBA matrix. Our results show that incorporating 10 wt% untreated Al increases thermal conductivity from 7.35 to 9.60 W/m·K; however, this gain comes at the cost of flexural strength, which drops to 18.29 MPa. In contrast, titanate-modified Al (Ti@Al) not only preserves high thermal conductivity but also restores mechanical performance, achieving a flexural strength of 35.31 MPa (at 5 wt% Ti@Al) and increasing impact strength from 0.60 to 1.01 kJ/m2. These findings demonstrate that interfacial engineering via titanate coupling offers a compelling strategy to overcome the thermal–mechanical trade-off in hybrid composites, enabling the development of high-performance materials for advanced thermal interface and structural applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Polymer Materials, Jilin Institute of Chemical Technology, Jilin 132022, China.
- Department of Mechanical Engineering, College of Engineering, Kyung Hee University, Yongin 17104, Republic of Korea.
- Department of Chemistry, Inha University, Incheon 22212, Republic of Korea.
ORCID-Profile: Soo-Jin Park
Förderung
- National Research Foundation of Korea (NRF)
- Commercialization Promotion Agency for R&D Outcomes (COMPA) grant
- Korea Energy
- National Natural Science Foundation of Jilin Province
Zitieren
APA
Cheng, H. L., Lee, S. Y., Chu, N., Lee, S. Y., Jin, F. L., & Park, S. J. (2025). Titanate-Coupled Aluminum as an Interfacial Modifier for Enhanced Thermal and Mechanical Performance in Hybrid Epoxy Composites. Polymers, 17(14), 1922. https://doi.org/10.3390/polym17141922
Vancouver
Cheng HL, Lee SY, Chu N, Lee SY, Jin FL, Park SJ. Titanate-Coupled Aluminum as an Interfacial Modifier for Enhanced Thermal and Mechanical Performance in Hybrid Epoxy Composites. Polymers. 2025;17(14):1922. doi:10.3390/polym17141922
BibTeX
@article{Cheng2025,
author = {Cheng, Hai-Long and Lee, Seul-Yi and Chu, Na and Lee, Se-Yeol and Jin, Fan-Long and Park, Soo-Jin},
title = {Titanate-Coupled Aluminum as an Interfacial Modifier for Enhanced Thermal and Mechanical Performance in Hybrid Epoxy Composites},
journal = {Polymers},
year = {2025},
volume = {17},
number = {14},
pages = {1922},
doi = {10.3390/polym17141922}
}
EUVIMED