EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Continuous Extrusion Process for Alginate Biopolymer Films for Sustainable Applications

Zahra Eslami iD, Saïd Elkoun iD, Miraidin Mirzapour iD, Mathieu Robert iD

Polymers · 29.06.2025 · 17 (13) · 1818

DOI: 10.3390/polym17131818 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.06.2025. Verfasst von Zahra Eslami und 3 weiteren Autor:innen. Beteiligte Einrichtung: Center for Innovation in Technological Ecodesign (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mitacs, Wade Consumer Goods.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel method for producing extrudable alginate-based films using continuous thermo-mechanical mixing, providing a scalable alternative to conventional solvent-casting techniques. The effects of glycerol concentration (30–50 wt%) and processing temperature (110–120 °C) on the films’ thermal, mechanical, and structural properties were systematically investigated. Structural characterization was performed using 1H NMR and FT-IR, and thermal transitions were analyzed via DSC (Differential Scanning Calorimetry) and DMA (Dynamic Mechanical Analysis). The glass transition temperature (Tg) of the alginate/glycerol/water system was modeled using the Gordon–Taylor equation. Glycerol incorporation significantly reduced Tg—by up to 76 °C with 40 wt% glycerol—and enhanced ductility and toughness, reaching 3.26 MJ/m3 at the optimal level. The influence of processing temperature was found to depend on plasticizer content: at lower glycerol levels, elevated temperatures decreased Tg and elongation at break, likely due to thermal degradation. However, films with higher glycerol content retained stable mechanical and thermal behavior across both temperature profiles. This work is among the first to explore how processing temperature affects extruded, plasticized pure alginate films. The findings provide key insights into the formulation and scalable production of bio-based packaging materials, highlighting the importance of optimizing both plasticizer concentration and processing parameters.

Schlagwörter

Stichwörter der Autor:innen

alginateextruderglass transition temperaturemechanical propertiesplasticizer

Autor:innen und Institutionen

  • Center for Innovation in Technological Ecodesign (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada.
  • Research Center for High-Performance Polymer and Composite Systems (CREPEC), Montreal, QC H3A 0C3, Canada.

ORCID-Profile: Zahra Eslami, Saïd Elkoun, Miraidin Mirzapour, Mathieu Robert

Förderung

  • Mitacs
  • Wade Consumer Goods

Zitieren

APA

Eslami, Z., Elkoun, S., Mirzapour, M., & Robert, M. (2025). Development of a Continuous Extrusion Process for Alginate Biopolymer Films for Sustainable Applications. Polymers, 17(13), 1818. https://doi.org/10.3390/polym17131818

Vancouver

Eslami Z, Elkoun S, Mirzapour M, Robert M. Development of a Continuous Extrusion Process for Alginate Biopolymer Films for Sustainable Applications. Polymers. 2025;17(13):1818. doi:10.3390/polym17131818

BibTeX
@article{Eslami2025,
  author = {Eslami, Zahra and Elkoun, Saïd and Mirzapour, Miraidin and Robert, Mathieu},
  title = {Development of a Continuous Extrusion Process for Alginate Biopolymer Films for Sustainable Applications},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {13},
  pages = {1818},
  doi = {10.3390/polym17131818}
}
Kostenlos starten →