EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of the Fill Value Parameters on Acoustic and Physical–Mechanical Performance of 3D-Printed Panels

Mihai Alin Pop iD, Mihaela Coșniță iD, Sebastian-Marian Zaharia iD, Lucia Antoaneta Chicoș, Cătălin Croitoru iD, Ionuț Claudiu Roată, Dorin Cătană iD

Polymers · 28.06.2025 · 17 (13) · 1806

DOI: 10.3390/polym17131806 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.06.2025. Verfasst von Mihai Alin Pop und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science, Transilvania University of Brasov, 500036 Brasov, Romania. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Research, Innovation and Digitization, CNCS–UEFISCDI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the acoustic and mechanical performance of three types of 3D-printed polylactic acid (PLA) panels with varying infill densities (5–100%) and structural configurations. Using fused filament fabrication (FFF), panels were designed as follows: Type 1 (core infill only), Type 2 (core infill + 1.6 mm shell), and Type 3 (core infill + multi-layer shells). Acoustic testing via impedance tube revealed that Type 2 panels with a 65% infill density achieved the highest sound absorption coefficient (α = 0.99), while Type 1 panels exhibited superior sound transmission loss (TLn = 53.3 dB at 60% infill). Mechanical testing demonstrated that shell layers improved tensile and bending resistance by 25.7% and 36.9%, respectively, but reduced compressive strength by 23.6%. Microscopic analysis highlighted ductile failure in Type 2 and brittle fracture in Type 3. The optimal panel thickness for acoustic performance was identified as 4 mm, balancing material efficiency and sound absorption. These findings underscore the potential of tailored infill parameters in sustainable noise-control applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingacoustic insulationinfill densitymechanical propertiespolylactic acid (PLA)sound absorption

Autor:innen und Institutionen

  • Department of Materials Science, Transilvania University of Brasov, 500036 Brasov, Romania.
  • Department of Product Design, Mechatronics and Environment, Transilvania University of Brasov, 29 Eroilor Ave., 500036 Brasov, Romania.
  • Department of Manufacturing Engineering, Transilvania University of Brasov, 500036 Brasov, Romania.
  • Materials Engineering and Welding Department, Transilvania University of Brasov, 500036 Brasov, Romania.

ORCID-Profile: Mihai Alin Pop, Mihaela Coșniță, Sebastian-Marian Zaharia, Cătălin Croitoru, Dorin Cătană

Förderung

  • Ministry of Research, Innovation and Digitization, CNCS–UEFISCDI

Zitieren

APA

Pop, M. A., Coșniță, M., Zaharia, S. M., Chicoș, L. A., Croitoru, C., Roată, I. C., & Cătană, D. (2025). Influence of the Fill Value Parameters on Acoustic and Physical–Mechanical Performance of 3D-Printed Panels. Polymers, 17(13), 1806. https://doi.org/10.3390/polym17131806

Vancouver

Pop MA, Coșniță M, Zaharia SM, Chicoș LA, Croitoru C, Roată IC, et al. Influence of the Fill Value Parameters on Acoustic and Physical–Mechanical Performance of 3D-Printed Panels. Polymers. 2025;17(13):1806. doi:10.3390/polym17131806

BibTeX
@article{Pop2025,
  author = {Pop, Mihai Alin and Coșniță, Mihaela and Zaharia, Sebastian-Marian and Chicoș, Lucia Antoaneta and Croitoru, Cătălin and Roată, Ionuț Claudiu and Cătană, Dorin},
  title = {Influence of the Fill Value Parameters on Acoustic and Physical–Mechanical Performance of 3D-Printed Panels},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {13},
  pages = {1806},
  doi = {10.3390/polym17131806}
}
Kostenlos starten →