EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of Microcellular High-Density Polyethylene with Thermal Expandable Microspheres

Guo-Shun Chen, Xue-Kun Li, Wei-Cheng Yang

Polymers · 26.06.2025 · 17 (13) · 1773

DOI: 10.3390/polym17131773 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2025. Verfasst von Guo-Shun Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polyolefins and Catalysis, Shanghai 200062, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Laboratory of Green Chemical Materials and Safety Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure and mechanical properties of foamed high-density polyethylene (HDPE) prepared with thermal expandable microspheres (TEMs) by an injection molding method were investigated, especially for the effect of different injection times, nozzle temperatures, and TEM contents. The results showed that it was beneficial to increase the expansion ratio in the HDPE of microspheres with a shorter injection time and higher nozzle temperature. However, the addition of TEMs reduced the crystallinity of the foamed HDPE, and the crystallinity decreases further with the increasing TEMs content, which led to the decrease in Young’s modulus and tensile strength. When the nozzle temperature reached 220 °C, the mechanical properties of the foamed HDPE diminished significantly due to the collapse of the internal cells. At the TEMs content of 1.5 wt.%, an injection time of 2.0 s, and a nozzle temperature of 210 °C, a foamed HDPE was prepared with a cell size of 89.72 μm and a cell density of 4.39 × 108 cells/cm3. This foam exhibited a reduction density of 5.75%, a tensile strength of 22.6 MPa, and a Yang’s modulus of 1172.3 MPa, demonstrating excellent overall mechanical properties.

Schlagwörter

Stichwörter der Autor:innen

foamed high-density polyethyleneinjection moldingthermal expansion microspheres

Autor:innen und Institutionen

  • State Key Laboratory of Polyolefins and Catalysis, Shanghai 200062, China.
  • Guangxi Key Laboratory of Green Chemical Materials and Safety Technology, Qingzhou 535000, China.
  • Shanghai Research Institute of Chemical Industry Co., Ltd., Shanghai 200062, China.
  • Shanghai Key Laboratory of Catalysis Technology for Polyolefins, Shanghai 200062, China.

Förderung

  • Guangxi Key Laboratory of Green Chemical Materials and Safety Technology

Zitieren

APA

Chen, G. S., Li, X. K., & Yang, W. C. (2025). Preparation of Microcellular High-Density Polyethylene with Thermal Expandable Microspheres. Polymers, 17(13), 1773. https://doi.org/10.3390/polym17131773

Vancouver

Chen GS, Li XK, Yang WC. Preparation of Microcellular High-Density Polyethylene with Thermal Expandable Microspheres. Polymers. 2025;17(13):1773. doi:10.3390/polym17131773

BibTeX
@article{Chen2025,
  author = {Chen, Guo-Shun and Li, Xue-Kun and Yang, Wei-Cheng},
  title = {Preparation of Microcellular High-Density Polyethylene with Thermal Expandable Microspheres},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {13},
  pages = {1773},
  doi = {10.3390/polym17131773}
}
Kostenlos starten →