The Effect of Drying Methods on the Pore Structure of Balsa Wood Aerogels
Polymers · 17.06.2025 · 17 (12) · 1686
DOI: 10.3390/polym17121686 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.06.2025. Verfasst von Min Yin und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Material Science and Art Design, Inner Mongolia Agricultural University, Hohhot 010018, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Natural Science Foundation Project of Inner Mongolia Autonomous Region, the Science and Technology Program Project of Inner Mongolia Autonomous Region.
Abstract (Originalsprache)
Drying constitutes an essential step in aerogel fabrication, where the drying method directly determines the pore structure and consequently influences the material’s functionality. This study employed various drying techniques to prepare balsa-wood-derived aerogels, systematically investigating their effects on microstructure, density, and performance characteristics. The results demonstrate that different drying methods regulate aerogels through distinct pore structure modifications. Supercritical CO2 drying optimally preserves the native wood microstructure, yielding aerogels with superior thermal insulation performance. Freeze-drying induces the formation of ice crystals, which reconstructs the microstructure, resulting in aerogels with minimal density, significantly enhanced permeability, and exceptional cyclic water absorption capacity. Vacuum drying, oven drying, and natural drying all lead to significant deformation of the aerogel pore structure. Among them, oven drying increases the pore quantity of aerogels through volumetric contraction, thereby achieving the highest specific surface area. However, aerogels prepared by air drying have the highest density and the poorest thermal insulation performance. This study demonstrates that precise control of liquid surface tension during drying can effectively regulate both the pore architecture and functional performance of wood-derived aerogels. The findings offer fundamental insights into tailoring aerogel properties through optimized drying processes, providing valuable guidance for material design and application development.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Material Science and Art Design, Inner Mongolia Agricultural University, Hohhot 010018, China.
- Key Laboratory of Wood Science and Technology of National Forestry and Grassland Administration, Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China.
ORCID-Profile: Yun Lu
Förderung
- the National Natural Science Foundation of China
- the Natural Science Foundation Project of Inner Mongolia Autonomous Region
- the Science and Technology Program Project of Inner Mongolia Autonomous Region
- National Natural Science Foundation of China
- Natural Science Foundation Project of Inner Mongolia Autonomous Region
- Science and Technology Program Project of Inner Mongolia Autonomous Region
Zitieren
APA
Yin, M., Fu, Z., Yu, X., Wang, X., & Lu, Y. (2025). The Effect of Drying Methods on the Pore Structure of Balsa Wood Aerogels. Polymers, 17(12), 1686. https://doi.org/10.3390/polym17121686
Vancouver
Yin M, Fu Z, Yu X, Wang X, Lu Y. The Effect of Drying Methods on the Pore Structure of Balsa Wood Aerogels. Polymers. 2025;17(12):1686. doi:10.3390/polym17121686
BibTeX
@article{Yin2025,
author = {Yin, Min and Fu, Zongying and Yu, Xia and Wang, Ximing and Lu, Yun},
title = {The Effect of Drying Methods on the Pore Structure of Balsa Wood Aerogels},
journal = {Polymers},
year = {2025},
volume = {17},
number = {12},
pages = {1686},
doi = {10.3390/polym17121686}
}
EUVIMED