EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors

Chong Li, Jiayou Wang, Meng Li, Haoyu Wang, Yiguo Song, Xiangzhe Meng, Ruiliang Liu iD

Polymers · 16.06.2025 · 17 (12) · 1668

DOI: 10.3390/polym17121668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.06.2025. Verfasst von Chong Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Project for Basic Product Innovation, The Key Research and Development Program of Heilongjiang Province, Civilian Ship Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite rotors, attributing to their leveraging characteristics of the light weight, high strength, high rigidity, corrosion resistance, and low noise, can significantly reduce the moment of inertia and enhance equipment operational efficiency. Using carbon fiber/glass fiber hybrid-reinforced resin–matrix composites as the rotor base material, the radial stability of a rotor can be effectively increased by regulating the fiber volume content. Meanwhile, the introduction of glass fiber not only enables the transition between the metal hub and composite rim but also optimizes the cost structure of the composite system, overcoming the economic bottleneck of single carbon fiber-reinforced resin–matrix composite rotors. This paper employs the finite element method to analyze a three-dimensional model of a composite rotor, investigating the performance of its metal hub and hybrid-reinforced resin–matrix composite rim. According to the radial stress distribution of the composite rotor during operation, the mixing ratio of carbon fiber/glass fiber is adjusted. The high-speed rotation condition of the composite rotor at 18,000 revolutions per minute is simulated to verify its safety and reliability.

Schlagwörter

Stichwörter der Autor:innen

composites rotorfinite element analysishigh-speed rotorhybrid reinforced composite materials

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China.
  • College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China.

ORCID-Profile: Ruiliang Liu

Förderung

  • Special Project for Basic Product Innovation
  • The Key Research and Development Program of Heilongjiang Province
  • Civilian Ship Special Project
  • Key Research and Development Program of Heilongjiang Province

Zitieren

APA

Li, C., Wang, J., Li, M., Wang, H., Song, Y., Meng, X., & Liu, R. (2025). Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors. Polymers, 17(12), 1668. https://doi.org/10.3390/polym17121668

Vancouver

Li C, Wang J, Li M, Wang H, Song Y, Meng X, et al. Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors. Polymers. 2025;17(12):1668. doi:10.3390/polym17121668

BibTeX
@article{Li2025,
  author = {Li, Chong and Wang, Jiayou and Li, Meng and Wang, Haoyu and Song, Yiguo and Meng, Xiangzhe and Liu, Ruiliang},
  title = {Simulation of the Design Performance of Carbon Fiber/Glass Fiber Hybrid-Reinforced Resin Matrix Composite Rotors},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {12},
  pages = {1668},
  doi = {10.3390/polym17121668}
}
Kostenlos starten →