EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrospun Polybenzimidazole Membranes: Fabrication and Fine-Tuning Through Physical and Statistical Approaches

Emmanuel De Gregorio iD, Giuseppina Roviello iD, Valentina Naticchioni iD, Viviana Cigolotti iD, Alfonso Pozio iD, Luis Alexander Hein, Carlo De Luca iD, Claudio Ferone iD, Antonio Rinaldi iD, Oreste Tarallo iD

Polymers · 06.06.2025 · 17 (12) · 1594

DOI: 10.3390/polym17121594 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.06.2025. Verfasst von Emmanuel De Gregorio und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Naples 'Parthenope', Centro Direzionale, Isola C4, 80143 Napoli, Italy. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ENEA Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Ministero dell'Università e della Ricerca, Ministero dell’Università e della Ricerca.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polybenzimidazole (PBI), a high-performance polymer known for its exceptional thermal stability and chemical resistance, was processed by solution electrospinning to manufacture fibrous non-woven membranes. The process was repeated under different conditions by adjusting four main settings: the polymer solution concentration, the flow rate, the voltage applied between the needle and the collector, and the separating distance. To clarify the interplay between process parameters and material properties, a Design of Experiment (DOE) approach was used to systematically analyze the effects of said parameters on microstructural properties, including fiber diameter, porosity, and air permeability, pointing out that the increase in viscosity improves fiber uniformity, while optimizing the applied voltage and the needle–collector distance enhances jet stability and solvent evaporation, crucial for defect-free fibrous microstructures. Post-processing via calendering further refined the membrane texture and properties, for example by reducing porosity and air permeability without significantly altering the fibrous morphology, particularly at low lamination ratios. Thermal and mechanical evaluations highlighted that the obtained electrospun PBI membranes exhibited enhanced flexibility, but lower tensile strength compared to cast films due to the underlying open pore microstructure. This integrated approach—combining experimental characterization, DOE-guided optimization, and post-processing via calendering—provides a systematic framework for tailoring PBI membranes for specific applications, such as filtration, fuel cells, and molecular sieving. The findings highlight the potential of PBI-based electrospun membranes as versatile materials, offering high thermal stability, chemical resistance, and tunable properties, thereby establishing a foundation for further innovation in advanced polymeric membrane design and applications for energy and sustainability.

Schlagwörter

Stichwörter der Autor:innen

Design of Experiment (DOE)analysis of variance (ANOVA)electrospinningpolybenzimidazole membranes

Autor:innen und Institutionen

  • Department of Engineering, University of Naples 'Parthenope', Centro Direzionale, Isola C4, 80143 Napoli, Italy.
  • Department of Energy Technologies and Renewable Sources (TERIN), ENEA, Via Anguillarese 301, 00123 Rome, Italy.
  • Nanofaber s.r.l., Via Anguillarese 301, 00123 Rome, Italy.
  • Department of Chemical Sciences, Università degli Studi di Napoli Federico II, Complesso Universitario di Monte Sant'Angelo, Via Cintia, 80126 Napoli, Italy.

ORCID-Profile: Emmanuel De Gregorio, Giuseppina Roviello, Valentina Naticchioni, Viviana Cigolotti, Alfonso Pozio, Carlo De Luca, Claudio Ferone, Antonio Rinaldi, Oreste Tarallo

Förderung

  • ENEA Italian National Agency for New Technologies, Energy and Sustainable Economic Development
  • Ministero dell'Università e della Ricerca
  • Ministero dell’Università e della Ricerca

Zitieren

APA

De Gregorio, E., Roviello, G., Naticchioni, V., Cigolotti, V., Pozio, A., Hein, L. A., De Luca, C., Ferone, C., Rinaldi, A., & Tarallo, O. (2025). Electrospun Polybenzimidazole Membranes: Fabrication and Fine-Tuning Through Physical and Statistical Approaches. Polymers, 17(12), 1594. https://doi.org/10.3390/polym17121594

Vancouver

De Gregorio E, Roviello G, Naticchioni V, Cigolotti V, Pozio A, Hein LA, et al. Electrospun Polybenzimidazole Membranes: Fabrication and Fine-Tuning Through Physical and Statistical Approaches. Polymers. 2025;17(12):1594. doi:10.3390/polym17121594

BibTeX
@article{DeGregorio2025,
  author = {De Gregorio, Emmanuel and Roviello, Giuseppina and Naticchioni, Valentina and Cigolotti, Viviana and Pozio, Alfonso and Hein, Luis Alexander and De Luca, Carlo and Ferone, Claudio and Rinaldi, Antonio and Tarallo, Oreste},
  title = {Electrospun Polybenzimidazole Membranes: Fabrication and Fine-Tuning Through Physical and Statistical Approaches},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {12},
  pages = {1594},
  doi = {10.3390/polym17121594}
}
Kostenlos starten →