EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Projection-Based Simulation Method for Robotic 3D Printing of Large-Scale Polymer Composite Structures

Yuen Xia, Kil-Sung Lee, Sung Kyu Ha

Polymers · 04.06.2025 · 17 (11) · 1564

DOI: 10.3390/polym17111564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.06.2025. Verfasst von Yuen Xia und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Hanyang University, 222 Wangsimri-ro, Seonjong, Seoul 04763, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, DSME CONSTRUCTION CO., LTD.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As large-scale additive manufacturing advances, the reliable prediction of the structural behavior of FDM-printed composites is becoming increasingly important. However, existing finite element methods often oversimplify the material anisotropy introduced by the printing path. This study proposes a projection-based method that maps toolpath-defined fiber orientations directly into a finite element model to represent anisotropic mechanical behavior. The mechanical properties of printed carbon fiber-reinforced ABS were experimentally characterized in three directions (UDL, UDT, and UD10). The results confirmed strong anisotropy, with elastic moduli ranging from 3.2 to 9.8 GPa and tensile strengths from 20 to 81 MPa. The shear modulus and strength obtained from the 10° off-axis tensile tests were 1.17 GPa and 10.9 MPa, respectively. This directional data enabled the implementation of the FE model of a 20 m-long printed ship structure. The predicted mid-span deflection (2.19 mm) differed by only 5% from the experimental measurement (2.08 mm). While effective, this method may face challenges with highly irregular geometries. Nevertheless, it offers a scalable approach for the accurate simulation of FDM-printed composites.

Schlagwörter

Stichwörter der Autor:innen

characterization of material propertiesfused deposition modeling (FDM)large structure 3D printingprojection methodshort fiber-reinforced polymer composites

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Hanyang University, 222 Wangsimri-ro, Seonjong, Seoul 04763, Republic of Korea.
  • Human Composites Co., Ltd., 152, Jayumuyeok-ro, Gunsan-si 54002, Jeollabuk-do, Republic of Korea.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • DSME CONSTRUCTION CO., LTD

Zitieren

APA

Xia, Y., Lee, K. S., & Ha, S. K. (2025). Projection-Based Simulation Method for Robotic 3D Printing of Large-Scale Polymer Composite Structures. Polymers, 17(11), 1564. https://doi.org/10.3390/polym17111564

Vancouver

Xia Y, Lee KS, Ha SK. Projection-Based Simulation Method for Robotic 3D Printing of Large-Scale Polymer Composite Structures. Polymers. 2025;17(11):1564. doi:10.3390/polym17111564

BibTeX
@article{Xia2025,
  author = {Xia, Yuen and Lee, Kil-Sung and Ha, Sung Kyu},
  title = {Projection-Based Simulation Method for Robotic 3D Printing of Large-Scale Polymer Composite Structures},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1564},
  doi = {10.3390/polym17111564}
}
Kostenlos starten →