EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Anticorrosion Coating Performance: Synthesis of Polyurethane/Epoxy Hybrids

Lyazzat Bekbayeva iD, El-Sayed Negim iD, Khaldun M Al Azzam iD, Rinat Zhanibekov iD, Gulzhakhan Yeligbayeva, Gulnaz Zhaksylykovna Moldabayeva, Ewies F Ewies iD

Polymers · 29.05.2025 · 17 (11) · 1516

DOI: 10.3390/polym17111516 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.05.2025. Verfasst von Lyazzat Bekbayeva und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Kazakh British Technical University, 106 Walikhanov Street, Almaty 050010, Kazakhstan. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was financially supported by the Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (Grant No. BR2188…, Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corrosion-resistant coatings are essential for prolonging the lifespan of metal structures, yet conventional formulations often lack sufficient mechanical strength and chemical durability. This study focuses on the development of polyurethane/epoxy hybrid coatings (PUAE) with varying epoxy resin content (5%, 10%, and 15% by weight) to enhance performance. The hybrid films demonstrated improved mechanical properties with increasing epoxy content, including a rise in tensile strength from 39.1 MPa (PUA) to 86.3 MPa (PUAE15) and adhesion from 2.5 MPa to 8.3 MPa. Hardness also increased from 69 Shore A to 98 Shore A, while elongation at break decreased from 158% to 95%, indicating a shift toward a stiffer material. The thermal stability, assessed by TGA, showed higher degradation temperatures, with PUAE15 reaching a maximum decomposition temperature of 390 °C, compared to 320 °C for pure polyurethane. Viscosity at 5 rpm increased from 12.300 mPa·s to 18.563 mPa·s, and the contact angle improved from 105° to 149°, highlighting enhanced hydrophobicity. PUAE15 also displayed superior resistance to solvents and acidic environments. These results affirm that epoxy content significantly influences the structural, mechanical, and corrosion-resistant properties of polyurethane-based coatings, making PUAE15 a promising candidate for advanced anticorrosive applications.

Schlagwörter

Stichwörter der Autor:innen

corrosionepoxyhybridmechanicalpolyurethaneresistance

Autor:innen und Institutionen

  • School of Chemical Engineering, Kazakh British Technical University, 106 Walikhanov Street, Almaty 050010, Kazakhstan.
  • National Nanotechnology Open Laboratory, Al-Faraby Kazakh National University, Almaty 050040, Kazakhstan.
  • Department of Chemistry, Faculty of Science, The University of Jordan, Amman 11942, Jordan.
  • Institute of Organic Synthesis and Carbon Chemistry of the Republic of Kazakhstan, Alikhanov Street., 1, Karaganda 100000, Kazakhstan.
  • School of Petroleum Engineering, Satbayev University, 22 Satpayev Street, Almaty 050013, Kazakhstan.
  • Organometallic and Organometalloid Chemistry Department, Chemical Industries Research Institute, National Research Centre, El-Bhouth Street, Dokki, Giza 12622, Egypt.

ORCID-Profile: Lyazzat Bekbayeva, El-Sayed Negim, Khaldun M Al Azzam, Rinat Zhanibekov, Ewies F Ewies

Förderung

  • This work was financially supported by the Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (Grant No. BR2188…
  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Bekbayeva, L., Negim, E. S., Al Azzam, K. M., Zhanibekov, R., Yeligbayeva, G., Moldabayeva, G. Z., & Ewies, E. F. (2025). Optimizing Anticorrosion Coating Performance: Synthesis of Polyurethane/Epoxy Hybrids. Polymers, 17(11), 1516. https://doi.org/10.3390/polym17111516

Vancouver

Bekbayeva L, Negim ES, Al Azzam KM, Zhanibekov R, Yeligbayeva G, Moldabayeva GZ, et al. Optimizing Anticorrosion Coating Performance: Synthesis of Polyurethane/Epoxy Hybrids. Polymers. 2025;17(11):1516. doi:10.3390/polym17111516

BibTeX
@article{Bekbayeva2025,
  author = {Bekbayeva, Lyazzat and Negim, El-Sayed and Al Azzam, Khaldun M and Zhanibekov, Rinat and Yeligbayeva, Gulzhakhan and Moldabayeva, Gulnaz Zhaksylykovna and Ewies, Ewies F},
  title = {Optimizing Anticorrosion Coating Performance: Synthesis of Polyurethane/Epoxy Hybrids},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1516},
  doi = {10.3390/polym17111516}
}
Kostenlos starten →