EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification Mechanism of Low-Dosage Vinyl Acetate-Ethylene on Ordinary Portland Cement–Sulfoaluminate Cement Binary Blended Rapid Repair Mortar

Hecong Wang, Yuxue Zhu, Ting Li, Xiaoning Li, Shuai Peng, Jinzhu Guo, Xuqiang Pei, Congchun Zhong, Yihang Yang, Qiang Ma, Zhonglun Zhang, Minghui Wu und 3 weitere

Polymers · 28.05.2025 · 17 (11) · 1501

DOI: 10.3390/polym17111501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.05.2025. Verfasst von Hecong Wang und 14 weiteren Autor:innen. Beteiligte Einrichtung: CNBM Zhongyan Technology Co., Ltd., Beijing 100024, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Beijing Zhuoyue Electric Power Construction Co., Ltd., Beijing-Shanghai High speed Railway Co., Ltd, Beijing-Shanghai High speed Railway Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study developed a vinyl acetate-ethylene rapid repair mortar (VAE-RRM) by using a binary blended cementitious system (ordinary Portland cement and sulfoaluminate cement) and vinyl acetate-ethylene (VAE) redispersible polymer powder. The effects of the polymer-to-cement ratio (P/C: 0~2.0%) on setting time, mechanical properties, interfacial bonding, and microstructure were systematically investigated. The results reveal that VAE delayed cement hydration via physical encapsulation and chemical chelation, extending the initial setting time to 182 min at P/C = 2.0%. At the optimal P/C = 0.9%, a synergistic organic–inorganic network enhanced flexural strength (14.62 MPa at 28 d, 34.0% increase) and interfacial bonding (2.74 MPa after interface treatment), though compressive strength decreased to 65.7 MPa due to hydration inhibition. Excessive VAE (P/C ≥ 1.5%) suppressed AFt/C-S-H growth, increasing harmful pores (>1 μm) and degrading performance. Microstructural analysis via scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP) demonstrates that VAE films bridged hydration products, filled interfacial transition zones (ITZ), and refined pore structures, reducing the most probable pore size from 62.8 nm (reference) to 23.5 nm. VAE-RRM 3 (P/C = 0.9%) exhibited rapid hardening (initial setting time: 75 min), high substrate recovery (83.3%), and low porosity (

Schlagwörter

Stichwörter der Autor:innen

VAEmechanical propertiesmicrostructurepolymer-modified mortarrapid repair

Autor:innen und Institutionen

  • CNBM Zhongyan Technology Co., Ltd., Beijing 100024, China.
  • China Building Materials Academy, Beijing 100024, China.
  • School of Materials Science and Engineering, Hubei University, Wuhan 430062, China.

ORCID-Profile: Qunchao Zhang

Förderung

  • Beijing Zhuoyue Electric Power Construction Co., Ltd.
  • Beijing-Shanghai High speed Railway Co., Ltd
  • Beijing-Shanghai High speed Railway Co., Ltd.

Zitieren

APA

Wang, H., Zhu, Y., Li, T., Li, X., Peng, S., Guo, J., Pei, X., Zhong, C., Yang, Y., Ma, Q., Zhang, Z., Wu, M., Zhang, Q., Shi, D., & Song, Z. (2025). Modification Mechanism of Low-Dosage Vinyl Acetate-Ethylene on Ordinary Portland Cement–Sulfoaluminate Cement Binary Blended Rapid Repair Mortar. Polymers, 17(11), 1501. https://doi.org/10.3390/polym17111501

Vancouver

Wang H, Zhu Y, Li T, Li X, Peng S, Guo J, et al. Modification Mechanism of Low-Dosage Vinyl Acetate-Ethylene on Ordinary Portland Cement–Sulfoaluminate Cement Binary Blended Rapid Repair Mortar. Polymers. 2025;17(11):1501. doi:10.3390/polym17111501

BibTeX
@article{Wang2025,
  author = {Wang, Hecong and Zhu, Yuxue and Li, Ting and Li, Xiaoning and Peng, Shuai and Guo, Jinzhu and Pei, Xuqiang and Zhong, Congchun and Yang, Yihang and Ma, Qiang and Zhang, Zhonglun and Wu, Minghui and Zhang, Qunchao and Shi, De'an and Song, Zuobao},
  title = {Modification Mechanism of Low-Dosage Vinyl Acetate-Ethylene on Ordinary Portland Cement–Sulfoaluminate Cement Binary Blended Rapid Repair Mortar},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1501},
  doi = {10.3390/polym17111501}
}
Kostenlos starten →