EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Product Performance via a Modified Double-Diaphragm Forming (mDDF) Preform Method for Prepreg Compression Molding of Fiber-Reinforced Polymer Composites

Shin Kim iD, Honchung Shin, Kilsung Lee, Sungkyu Ha

Polymers · 27.05.2025 · 17 (11) · 1489

DOI: 10.3390/polym17111489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.05.2025. Verfasst von Shin Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Hanyang University, 222 Wangsimri-ro, Seonjong, Seoul 04763, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was partly supported by DSME CONSTRUCTION CO., LTD in 2023., DSME CONSTRUCTION Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An enhanced process for shaping thermoset fiber-reinforced composites using Modified Double-Diaphragm Forming (mDDF) in Prepreg Compression Molding (PCM) is proposed to address limitations in conventional forming quality. To minimize surface defects, prepregs were pre-cut to reduce wrinkle formation and trimmed after preforming. Complex geometries were managed through draping analysis, which enabled identification and mitigation of wrinkle-prone regions. A challenging layup configuration (±45/0/90/0/90/0/±45) was selected, and temperature-dependent behavior of the prepreg—such as resin fluidity and wrinkle characteristics—was evaluated from room temperature to 80 °C. Material characterization included tensile, bias extension, bending, friction, and density tests. Forming simulations using AniForm Suite 3.0 incorporated fitted material parameters for predictive analysis. Experimental validation confirmed that the mDDF process significantly improved fiber alignment and eliminated wrinkle defects, especially in 16 previously identified critical zones. The final parts exhibited superior surface quality and dimensional accuracy compared to conventional PCM, highlighting the potential of mDDF for precision manufacturing of complex thermoset composite structures.

Schlagwörter

Stichwörter der Autor:innen

Modified Double-Diaphragm Forming (mDDF)Prepreg Compression Molding (PCM)draping simulationforming defect analysisprepreg preformingthermoset compositeswrinkle elimination

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Hanyang University, 222 Wangsimri-ro, Seonjong, Seoul 04763, Republic of Korea.
  • Korea Carbon Industry Promotion Agency, 110-11, Ballyong-ro, Deokjin-gu, Jeonju-si 54853, Republic of Korea.
  • Human Composites Co., Ltd., 152, Jayumuyeok-ro, Gunsan-si 54002, Republic of Korea.

ORCID-Profile: Shin Kim

Förderung

  • This work was partly supported by DSME CONSTRUCTION CO., LTD in 2023.
  • DSME CONSTRUCTION Co., Ltd.

Zitieren

APA

Kim, S., Shin, H., Lee, K., & Ha, S. (2025). Enhancing Product Performance via a Modified Double-Diaphragm Forming (mDDF) Preform Method for Prepreg Compression Molding of Fiber-Reinforced Polymer Composites. Polymers, 17(11), 1489. https://doi.org/10.3390/polym17111489

Vancouver

Kim S, Shin H, Lee K, Ha S. Enhancing Product Performance via a Modified Double-Diaphragm Forming (mDDF) Preform Method for Prepreg Compression Molding of Fiber-Reinforced Polymer Composites. Polymers. 2025;17(11):1489. doi:10.3390/polym17111489

BibTeX
@article{Kim2025,
  author = {Kim, Shin and Shin, Honchung and Lee, Kilsung and Ha, Sungkyu},
  title = {Enhancing Product Performance via a Modified Double-Diaphragm Forming (mDDF) Preform Method for Prepreg Compression Molding of Fiber-Reinforced Polymer Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1489},
  doi = {10.3390/polym17111489}
}
Kostenlos starten →