EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative 3D-Printed Superhydrophobic Porous Architectures for Continuous Oil–Water Separation

Xiaolong Wang, Jingjing An, Alaa Hassan iD, Qingsen Gao, Xianhu Liu iD, Hakim Boudaoud

Polymers · 25.05.2025 · 17 (11) · 1465

DOI: 10.3390/polym17111465 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.05.2025. Verfasst von Xiaolong Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Équipe de Recherche sur les Processus Innovatifs (ERPI), Université de Lorraine, F-54000 Nancy, France. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient superhydrophobic oil–water separation materials are essential for environmental remediation and industrial wastewater treatment. In this study, by optimizing printing parameters, such as printing speed, extrusion multiplier, and layer height, we achieved high-precision 3D porous architectures with uniform pore sizes. The pore size could reach 677.3 µm, with a maximum deviation of less than 36.1 µm. Additionally, we successfully printed pores as small as 186.7 µm, representing the smallest FFF-printed pore size reported in the literature. The printed structures were modified using a spray-coating method, achieving a superhydrophobic surface with a water contact angle of 158.2°. The material was tested in a continuous oil–water separation system, maintaining stable oil removal performance for 24 h. The highest separation efficiency reached 88.6%, demonstrating strong durability and long-term applicability. This study establishes a scalable, low-cost approach for fabricating highly efficient 3D superhydrophobic porous materials, offering new opportunities for continuous oil spill cleanup and industrial wastewater treatment.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingfused filament fabricationoil–water separationsuperhydrophobicity

Autor:innen und Institutionen

  • Équipe de Recherche sur les Processus Innovatifs (ERPI), Université de Lorraine, F-54000 Nancy, France.
  • College of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • Institute of Polymer Materials, Friedrich-Alexander-University Erlangen-Nuremberg, Martensstr. 7, 91058 Erlangen, Germany.

ORCID-Profile: Alaa Hassan, Xianhu Liu

Förderung

  • China Scholarship Council

Zitieren

APA

Wang, X., An, J., Hassan, A., Gao, Q., Liu, X., & Boudaoud, H. (2025). Innovative 3D-Printed Superhydrophobic Porous Architectures for Continuous Oil–Water Separation. Polymers, 17(11), 1465. https://doi.org/10.3390/polym17111465

Vancouver

Wang X, An J, Hassan A, Gao Q, Liu X, Boudaoud H. Innovative 3D-Printed Superhydrophobic Porous Architectures for Continuous Oil–Water Separation. Polymers. 2025;17(11):1465. doi:10.3390/polym17111465

BibTeX
@article{Wang2025,
  author = {Wang, Xiaolong and An, Jingjing and Hassan, Alaa and Gao, Qingsen and Liu, Xianhu and Boudaoud, Hakim},
  title = {Innovative 3D-Printed Superhydrophobic Porous Architectures for Continuous Oil–Water Separation},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1465},
  doi = {10.3390/polym17111465}
}
Kostenlos starten →