EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Interface Fracture Parameters in Thermoplastic Fiber Metal Laminates Under Mixed-Mode I+II

Michał Smolnicki iD, Szymon Duda iD

Polymers · 24.05.2025 · 17 (11) · 1462

DOI: 10.3390/polym17111462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.05.2025. Verfasst von Michał Smolnicki und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wroclaw, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoplastic fiber metal laminates (FMLs) are hybrid material systems that consist of a thin aluminum alloy sheet bonded to plies of fiber-reinforced adhesive. They provide excellent properties like fatigue strength, damage-tolerant properties, and inherent resistance to corrosion. However, they are still challenging materials in terms of the metal–composite interface, which is the weakest link in this material system. In this paper, an experimental–numerical method for the determination of the fracture stress and energy for metal–composite interlayer is presented and verified. The proposed method utilizes four different experimental tests: DCB test (interface opening—mode I), ENF test (interface shearing—mode II), MMB test (mixed-mode I+II—opening with the shearing of the interface) and three-point bending test (3PB). For each test, digital twin in the form of a numerical model is prepared. The established numerical models for DCB and ENF allowed us to determine fracture stress and energy for mode I and mode II, respectively. On the basis of the numerical and experimental (from the MMB test) data, the B-K exponent is determined. Finally, the developed material model is verified in a three-point bending test, which results in mixed-mode conditions. The research is conducted on the thermoplastic FML made of aluminum alloy sheet and glass fiber reinforced polyamide 6. The research presented is complemented by fundamental mechanical tests, image processing and Scanning Electron Microscopy (SEM) analysis. As an effect, for the tested material, fracture parameters are determined using the described method.

Schlagwörter

Stichwörter der Autor:innen

FEAFMLfracture energymixed-mode

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wroclaw, Poland.

ORCID-Profile: Michał Smolnicki, Szymon Duda

Zitieren

APA

Smolnicki, M., & Duda, S. (2025). Determination of Interface Fracture Parameters in Thermoplastic Fiber Metal Laminates Under Mixed-Mode I+II. Polymers, 17(11), 1462. https://doi.org/10.3390/polym17111462

Vancouver

Smolnicki M, Duda S. Determination of Interface Fracture Parameters in Thermoplastic Fiber Metal Laminates Under Mixed-Mode I+II. Polymers. 2025;17(11):1462. doi:10.3390/polym17111462

BibTeX
@article{Smolnicki2025,
  author = {Smolnicki, Michał and Duda, Szymon},
  title = {Determination of Interface Fracture Parameters in Thermoplastic Fiber Metal Laminates Under Mixed-Mode I+II},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {1462},
  doi = {10.3390/polym17111462}
}
Kostenlos starten →