An Analysis of Foams Produced from Recycled Polyolefins and Low-Cost Foaming Agents: Benchmarking Using Pore Size, Distribution, Shear Effects, and Thermal Properties
Polymers · 06.05.2025 · 17 (9) · 1270
DOI: 10.3390/polym17091270 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 06.05.2025. Verfasst von Krishnamurthy Prasad und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sustainability Victoria under the scheme of Recycling Victoria Research and Development Fund, Sustainability Victoria under the scheme of Recycling Victoria Research and Development Fund—Materials.
Abstract (Originalsprache)
Foamed specimens were fabricated from virgin and recycled polyethylenes (linear low-density polyethylene, LLDPE, and low-density polyethylene, LDPE) using low-cost citric acid and sodium bicarbonate foaming agents. The foaming agents chosen showed decomposition behaviour either without phase change (sodium bicarbonate, NaB) or liquefaction followed by decomposition (citric acid, CA). The manufactured polyethylene foams were then benchmarked against a polyurethane foam. Two types of mixing were used prior to foaming, viz., solid-state pulverisation or high-shear internal mixing, and the effect of mixing on properties critical for foam viability were analysed. These properties included density, pore size, shape and distribution, crystallinity, and porosity. It was found that the virgin LLDPE and recycled LDPE showed similar trends in terms of narrow pore size distribution and reduced crystallinity, while the recycled LLDPE tended towards more pore coalescence. This difference in behaviour was attributed to the more mixed phase nature of the recycled LLDPE as opposed to the majorly single-phase virgin LLDPE and recycled LDPE. Lowered densities obtained for the NaB foaming compared to CA can be speculated to be because of the ionic and simple NaB decomposition as opposed to the complex radical pathway for the CA decomposition.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia.
- Robovoid Pty Ltd., Carnegie, VIC 3163, Australia.
ORCID-Profile: Krishnamurthy Prasad
Förderung
- Sustainability Victoria under the scheme of Recycling Victoria Research and Development Fund
- Sustainability Victoria under the scheme of Recycling Victoria Research and Development Fund—Materials
Zitieren
APA
Prasad, K., Jahromi, F. T., Nisha, S. S., Stehle, J., Gad, E., & Nikzad, M. (2025). An Analysis of Foams Produced from Recycled Polyolefins and Low-Cost Foaming Agents: Benchmarking Using Pore Size, Distribution, Shear Effects, and Thermal Properties. Polymers, 17(9), 1270. https://doi.org/10.3390/polym17091270
Vancouver
Prasad K, Jahromi FT, Nisha SS, Stehle J, Gad E, Nikzad M. An Analysis of Foams Produced from Recycled Polyolefins and Low-Cost Foaming Agents: Benchmarking Using Pore Size, Distribution, Shear Effects, and Thermal Properties. Polymers. 2025;17(9):1270. doi:10.3390/polym17091270
BibTeX
@article{Prasad2025,
author = {Prasad, Krishnamurthy and Jahromi, Fareed Tamaddoni and Nisha, Shammi Sultana and Stehle, John and Gad, Emad and Nikzad, Mostafa},
title = {An Analysis of Foams Produced from Recycled Polyolefins and Low-Cost Foaming Agents: Benchmarking Using Pore Size, Distribution, Shear Effects, and Thermal Properties},
journal = {Polymers},
year = {2025},
volume = {17},
number = {9},
pages = {1270},
doi = {10.3390/polym17091270}
}
EUVIMED