A Green Method for Bacterial Cellulose Electrospinning Using 1-Butyl-3-Methylimidazolium Acetate and γ-Valerolactone
Polymers · 24.04.2025 · 17 (9) · 1162
DOI: 10.3390/polym17091162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.04.2025. Verfasst von Elona Vasili und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Innovation" resources-Green/Innovation Action, Research and Innovation” resources—Green/Innovation Action.
Abstract (Originalsprache)
Bacterial cellulose (BC) is a highly pure and crystalline cellulose produced via bacterial fermentation. However, due to its chemical structure made of strong hydrogen bonds and its high molecular weight, BC can neither be melted nor dissolved by common solvents. Therefore, processing BC implies the use of very strong, often toxic and dangerous chemicals. In this study, we proved a green method to produce electrospun BC fibers by testing different ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate (BmimAc), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmimTFSI) and 1-ethyl-3-methylimidazolium dicyanamide (EmimDCA), either individually or as binary mixtures. Moreover, γ-valerolactone (GVL) was tested as a co-solvent derived from renewable sources to replace dimethyl sulfoxide (DMSO), aimed at making the viscosity of the cellulose solutions suitable for electrospinning. A BmimAc and BmimAc/EmimTFSI (1:1 w/w) mixture could dissolve BC up to 3 w%. GVL was successfully applied in combination with BmimAc as an alternative to DMSO. By optimizing the electrospinning parameters, meshes of continuous BC fibers, with average diameters ~0.5 μm, were produced, showing well-defined pore structures and higher water absorption capacity than pristine BC. The results demonstrated that BC could be dissolved and electrospun via a BmimAc/GVL solvent system, obtaining ultrafine fibers with defined morphology, thus suggesting possible greener methods for cellulose processing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy.
- School of Chemical, Materials and Biological Engineering, Faculty of Engineering, University of Sheffield, Mappin st. S13JD Sheffield, Sheffield S10 2TN, UK.
- Insigneo Institute for in Silico Medicine, Pam Liversidge Building, Sir Robert Hadfield Building, University of Sheffield, Sheffield S10 2TN, UK.
- Thuringian Institute for Textile and Plastics Research (TITK), D-07407 Rudolstadt, Germany.
ORCID-Profile: David A Gregory, Frederik Claeyssens, Patrizia Cinelli, Ipsita Roy, Maurizia Seggiani, Serena Danti
Förderung
- Research and Innovation" resources-Green/Innovation Action
- Research and Innovation” resources—Green/Innovation Action
Zitieren
APA
Vasili, E., Azimi, B., Raut, M. P., Gregory, D. A., Mele, A., Liu, B., Römhild, K., Krieg, M., Claeyssens, F., Cinelli, P., Roy, I., Seggiani, M., & Danti, S. (2025). A Green Method for Bacterial Cellulose Electrospinning Using 1-Butyl-3-Methylimidazolium Acetate and γ-Valerolactone. Polymers, 17(9), 1162. https://doi.org/10.3390/polym17091162
Vancouver
Vasili E, Azimi B, Raut MP, Gregory DA, Mele A, Liu B, et al. A Green Method for Bacterial Cellulose Electrospinning Using 1-Butyl-3-Methylimidazolium Acetate and γ-Valerolactone. Polymers. 2025;17(9):1162. doi:10.3390/polym17091162
BibTeX
@article{Vasili2025,
author = {Vasili, Elona and Azimi, Bahareh and Raut, Mahendra P and Gregory, David A and Mele, Andrea and Liu, Boyang and Römhild, Katrin and Krieg, Marcus and Claeyssens, Frederik and Cinelli, Patrizia and Roy, Ipsita and Seggiani, Maurizia and Danti, Serena},
title = {A Green Method for Bacterial Cellulose Electrospinning Using 1-Butyl-3-Methylimidazolium Acetate and γ-Valerolactone},
journal = {Polymers},
year = {2025},
volume = {17},
number = {9},
pages = {1162},
doi = {10.3390/polym17091162}
}
EUVIMED