High-Energy Milling as a Pre-Treatment Alternative for Lignocellulosic Fibers Derived from Brewer’s Spent Grain
Polymers · 24.04.2025 · 17 (9) · 1156
DOI: 10.3390/polym17091156 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.04.2025. Verfasst von Erik Gomez-Hernandez und 6 weiteren Autor:innen. Beteiligte Einrichtung: Doctorado en Ciencias Ambientales, Área Académica de Química-ICBI, Ciudad del Conocimiento, Carretera Pachuca-Tulancingo Km. 4.5, Colonia Carboneras,…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The objective of this study was to evaluate how high-energy milling affects the structural, thermal, and morphological properties of brewer’s spent grain fibers over time. The researchers determined the chemical composition of the samples using TAPPI techniques, particle size analysis, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). The samples displayed distinct morphologies and particle sizes depending on the treatment duration. The sample treated for 120 min (T120) showed the smallest particle size (19.4 µm). FTIR spectra revealed that the mechanical treatment strongly disrupted the structure of hemicellulose. The thermal stability of the samples decreased because of the applied treatment. Mechanical milling also fully eliminated the crystalline structure of cellulose in the samples. These findings indicate that high-energy milling holds strong potential as a pre-treatment method for the valorization of lignocellulosic residues.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Doctorado en Ciencias Ambientales, Área Académica de Química-ICBI, Ciudad del Conocimiento, Carretera Pachuca-Tulancingo Km. 4.5, Colonia Carboneras, Mineral de la Reforma 42184, Hidalgo, Mexico.
- Departamento de Materiales Avanzados, Centro de Investigación en Química Aplicada (CIQA), Blvd. Ing. Enrique Reyna H. No. 140, Col. San José de los Cerritos, Saltillo 25294, Coahuila, Mexico.
- Área Académica de Química-ICBI, Ciudad del Conocimiento, Carretera Pachuca-Tulancingo Km. 4.5, Colonia Carboneras, Mineral de la Reforma 42184, Hidalgo, Mexico.
- Área Académica de Ciencias de la Tierra y Materiales-ICBI, Ciudad del Conocimiento, Carretera Pachuca-Tulancingo Km. 4.5, Colonia Carboneras, Mineral de la Reforma 42184, Hidalgo, Mexico.
- Programa de Ingeniería Biomedica, Universidad Politécnica de Pachuca, Carretera Pachuca-Cd. Sahagún Km. 20 Ex-Hacienda de Santa Bárbara, Zempoala 43830, Hidalgo, Mexico.
- Tecnológico Nacional de México Campus Occidente, Paseo del Agrarismo 2000, Car. Mixquiahuala-Tula, Km. 2.5, Mixquiahuala de Juárez 42700, Hidalgo, Mexico.
ORCID-Profile: Javier Castro-Rosas, Rosa A Vázquez-García, Arturo Cadena-Ramírez, Carlos A Gomez-Aldapa
Zitieren
APA
Gomez-Hernandez, E., Hernández-Hernández, E., Castro-Rosas, J., Vázquez-García, R. A., Cadena-Ramírez, A., Jiménez-Villeda, B. E., & Gomez-Aldapa, C. A. (2025). High-Energy Milling as a Pre-Treatment Alternative for Lignocellulosic Fibers Derived from Brewer’s Spent Grain. Polymers, 17(9), 1156. https://doi.org/10.3390/polym17091156
Vancouver
Gomez-Hernandez E, Hernández-Hernández E, Castro-Rosas J, Vázquez-García RA, Cadena-Ramírez A, Jiménez-Villeda BE, et al. High-Energy Milling as a Pre-Treatment Alternative for Lignocellulosic Fibers Derived from Brewer’s Spent Grain. Polymers. 2025;17(9):1156. doi:10.3390/polym17091156
BibTeX
@article{GomezHernandez2025,
author = {Gomez-Hernandez, Erik and Hernández-Hernández, Ernesto and Castro-Rosas, Javier and Vázquez-García, Rosa A and Cadena-Ramírez, Arturo and Jiménez-Villeda, Brenda E and Gomez-Aldapa, Carlos A},
title = {High-Energy Milling as a Pre-Treatment Alternative for Lignocellulosic Fibers Derived from Brewer’s Spent Grain},
journal = {Polymers},
year = {2025},
volume = {17},
number = {9},
pages = {1156},
doi = {10.3390/polym17091156}
}
EUVIMED