EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modified Acrylate Pressure-Sensitive Adhesives for Low-Surface-Energy Substrate and Adhesion Mechanism Models

Lucheng Shi, Haoran Shi, Jun Qian iD, Yifeng Shi

Polymers · 22.04.2025 · 17 (9) · 1130

DOI: 10.3390/polym17091130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.04.2025. Verfasst von Lucheng Shi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Specially Functional Polymeric Materials and Related Technology (Ministry of Education), School of Materials Science and Engineerin…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most acrylate adhesives do not bond well to low-surface-energy substrates (e.g., polyethylene and polypropylene) due to the weak interaction force between the polar adhesive molecules and the substrate. To enhance the adhesion performance on low-surface-energy substrates and investigate the effects of substrate surface energy, roughness, pressure-sensitive adhesive (PSA) surface energy, viscosity, and modulus on adhesion performance, this study modifies the acrylate adhesive by incorporating a hydrogenated-terminated hydroxylated polybutadiene (HHTPB) structure with a double bond at one end. The results demonstrate an enhancement in the adhesion performance of the modified PSAs on High-Density Polyethylene (HDPE). The 24 h peel strength and loop tack increase to 4.88 N/25 mm and 8.14 N/25 mm at 20 °C, respectively, with the failure modes remaining adhesive failure. However, as the temperature increases, the peel strength decreases. The high-temperature resistance of the adhesive improves. Based on the experimental data, a mathematical model is proposed that incorporates both the wetting area and loss factor to predict peel strength. The influence of these two factors on the peel strength of the PSA is dependent on the application temperature of the adhesive.

Schlagwörter

Stichwörter der Autor:innen

adhesion mechanismhydroxylated polybutadienelow-surface-energy substratepeelpressure-sensitive adhesive

Autor:innen und Institutionen

  • Key Laboratory of Specially Functional Polymeric Materials and Related Technology (Ministry of Education), School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, C…
  • Shanghai Hongdingfang Science Co., Ltd., Shanghai 200237, China.

ORCID-Profile: Jun Qian

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Shi, L., Shi, H., Qian, J., & Shi, Y. (2025). Modified Acrylate Pressure-Sensitive Adhesives for Low-Surface-Energy Substrate and Adhesion Mechanism Models. Polymers, 17(9), 1130. https://doi.org/10.3390/polym17091130

Vancouver

Shi L, Shi H, Qian J, Shi Y. Modified Acrylate Pressure-Sensitive Adhesives for Low-Surface-Energy Substrate and Adhesion Mechanism Models. Polymers. 2025;17(9):1130. doi:10.3390/polym17091130

BibTeX
@article{Shi2025,
  author = {Shi, Lucheng and Shi, Haoran and Qian, Jun and Shi, Yifeng},
  title = {Modified Acrylate Pressure-Sensitive Adhesives for Low-Surface-Energy Substrate and Adhesion Mechanism Models},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {9},
  pages = {1130},
  doi = {10.3390/polym17091130}
}
Kostenlos starten →