EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analyzing the Tensile Creep Behavior of Different Types of Polypropylenes Using a Simple Fractional Differential Viscoelastic Model

Yasuhiko Otsuki, Kou Hashimoto, Yutaka Kobayashi iD, Shotaro Nishitsuji iD, Hisao Matsuno, Hiroshi Ito iD

Polymers · 18.04.2025 · 17 (8) · 1095

DOI: 10.3390/polym17081095 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.04.2025. Verfasst von Yasuhiko Otsuki und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for GREEN Materials and Advanced Processing, Yamagata University, Yonezawa 992-8510, Yamagata, Japan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Council for Science, Technology, and Innovation (CSTI), Cross-ministerial Strategic Innovation Promotion Program (SIP), the 3rd period of the SIP "Cir-cular ec…, Environmental Restoration and Conservation Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fractional differential viscoelastic calculus was used to develop a model for predicting the primary to tertiary creep in the tensile creep deformation of various polypropylenes (PPs). The primary and secondary creep were described via simple fractional differential viscoelasticity with an empirical formula for the stress and temperature dependence of the fractional differential order. Tertiary creep was treated as a pure viscous body with damage. The temperature dependence is treated simply, and Arrhenius’s law is applied. As for stress dependence, the Eyring law of the sinh function was applied to the primary and secondary creep processes, while the WLF-type shift function was adopted for tertiary creep. The primary and secondary creep behaviors of each model material showed creep growth rates according to the rigidity of each material. As for the tertiary creep, the homo PP showed a little damage progression with a damage index of 0.17, while the impact-resistant PP showed faster damage progression with a damage index of around 0.5. The three types of post-consumer recycled PPs showed intermediate properties between these virgin PPs, and no peculiarities were confirmed in the static creep behaviors. It was confirmed that the creep experimental results for all model materials fell on the same Monkman–Grant law. The presented creep model can predict the creep strain transition and minimum strain rate well and is effective in predicting the creep characteristics of PPs.

Schlagwörter

Stichwörter der Autor:innen

Eyring ruleMonkman–Grant lawcreepfractional differentialmodelingpolypropylenerecyclingviscoelastic model

Autor:innen und Institutionen

  • Research Center for GREEN Materials and Advanced Processing, Yamagata University, Yonezawa 992-8510, Yamagata, Japan.
  • Graduate School of Organic Materials Science, Yamagata University, Yonezawa 992-8510, Yamagata, Japan.

ORCID-Profile: Yutaka Kobayashi, Shotaro Nishitsuji, Hiroshi Ito

Förderung

  • Council for Science, Technology, and Innovation (CSTI), Cross-ministerial Strategic Innovation Promotion Program (SIP), the 3rd period of the SIP "Cir-cular ec…
  • Environmental Restoration and Conservation Agency

Zitieren

APA

Otsuki, Y., Hashimoto, K., Kobayashi, Y., Nishitsuji, S., Matsuno, H., & Ito, H. (2025). Analyzing the Tensile Creep Behavior of Different Types of Polypropylenes Using a Simple Fractional Differential Viscoelastic Model. Polymers, 17(8), 1095. https://doi.org/10.3390/polym17081095

Vancouver

Otsuki Y, Hashimoto K, Kobayashi Y, Nishitsuji S, Matsuno H, Ito H. Analyzing the Tensile Creep Behavior of Different Types of Polypropylenes Using a Simple Fractional Differential Viscoelastic Model. Polymers. 2025;17(8):1095. doi:10.3390/polym17081095

BibTeX
@article{Otsuki2025,
  author = {Otsuki, Yasuhiko and Hashimoto, Kou and Kobayashi, Yutaka and Nishitsuji, Shotaro and Matsuno, Hisao and Ito, Hiroshi},
  title = {Analyzing the Tensile Creep Behavior of Different Types of Polypropylenes Using a Simple Fractional Differential Viscoelastic Model},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1095},
  doi = {10.3390/polym17081095}
}
Kostenlos starten →