EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Block Polyether as an Interfacial Dispersant on the Properties of Nanosilica/Natural Rubber Composites

Ying Liu, Jiahui Mei, Depeng Gong, Yanjun Chen, Chaocan Zhang iD

Polymers · 17.04.2025 · 17 (8) · 1091

DOI: 10.3390/polym17081091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.04.2025. Verfasst von Ying Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Fundamental Research Funds for the Central Universities, Hubei Huaning Anti-corrosion Technology Co., Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the dispersion of silica within a natural rubber (NR) matrix and improve the modification efficiency of the silane coupling agent, a novel interfacial dispersant composed of block polyether with a PEO-PPO-PEO structure is employed in this study. This block polyether, consisting of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), serves to reduce the surface energy of silica and improve its compatibility with the rubber matrix. Three types of block polyethers with different hydrophilic–lipophilic balance (HLB) values of 8, 13, and 22 are selected to regulate the surface tension of silica. Subsequently, bis[γ-(triethoxysilyl)propyl] tetrasulfide (TESPT) is used to further modify the silica surface, aiming to prepare high-performance rubber composites. The results indicate that the HLB value of the block polyether has a significant influence on the system. Compared with block polyethers having HLB values of 8 and 22, the block polyether with an HLB value of 13 demonstrated superior silica dispersion, leading to enhanced filler–rubber interfacial interactions. Consequently, both the mechanical properties and processability of the NR composites were substantially improved. When the dosage of this block polyether was 1 phr, the composite exhibited a tensile strength of 28.9 MPa and an elongation at break of 523%.

Schlagwörter

Stichwörter der Autor:innen

block polyethersdispersionnatural rubbersilicasurface modification

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.

ORCID-Profile: Chaocan Zhang

Förderung

  • the Fundamental Research Funds for the Central Universities
  • Hubei Huaning Anti-corrosion Technology Co.
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Liu, Y., Mei, J., Gong, D., Chen, Y., & Zhang, C. (2025). Effect of Block Polyether as an Interfacial Dispersant on the Properties of Nanosilica/Natural Rubber Composites. Polymers, 17(8), 1091. https://doi.org/10.3390/polym17081091

Vancouver

Liu Y, Mei J, Gong D, Chen Y, Zhang C. Effect of Block Polyether as an Interfacial Dispersant on the Properties of Nanosilica/Natural Rubber Composites. Polymers. 2025;17(8):1091. doi:10.3390/polym17081091

BibTeX
@article{Liu2025,
  author = {Liu, Ying and Mei, Jiahui and Gong, Depeng and Chen, Yanjun and Zhang, Chaocan},
  title = {Effect of Block Polyether as an Interfacial Dispersant on the Properties of Nanosilica/Natural Rubber Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1091},
  doi = {10.3390/polym17081091}
}
Kostenlos starten →