EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Orthotropic Constitutive Modeling and Tsai–Wu Failure Criterion for Carbon Fiber-Reinforced PEEK Composites

Yu Ye, Zixin Yang, Dianwei Qu, Bingyin Hu, Lei Li iD

Polymers · 16.04.2025 · 17 (8) · 1076

DOI: 10.3390/polym17081076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.04.2025. Verfasst von Yu Ye und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Ji…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key R&D Program of Rizhao City, China, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper performs orthotropic constitutive modeling for short carbon fiber-reinforced polyetheretherketone (CF-PEEK) composites fabricated using material extrusion 3D printing technology. A variety of specimens for tensile, compressive, and shear tests are 3D printed under different deposition path patterns. The related experimental results disclose the strong directional mechanical properties, including tensile/compressive modulus and strength. The Tsai–Wu failure criterion is also developed based on the experimental data. The tensile–compressive behavior models of different orthotropic materials were constructed by importing the experimental data into COMSOL, followed by a compression simulation of the S-shaped specimen. The experimental results of the S-shaped compression test were compared with the COMSOL-based simulation analysis, which validated the effectiveness of the Tsai–Wu failure prediction. The predicted failure timings, locations and load–displacement curves all show a good agreement with experimental observations. Furthermore, the Tsai–Wu failure index is incorporated as a stress constraint in structural topology optimization, showing the effect of significantly reduced stress concentration. These findings and data will be supportive for the design and optimization of 3D printed CF-PEEK composites.

Schlagwörter

Stichwörter der Autor:innen

PEEKTsai–Wu failure criterioncarbon fiber-reinforcementorthotropic constitutive modeling

Autor:innen und Institutionen

  • Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China.
  • Shandong Wuzheng Group Co., Ltd., Rizhao 262300, China.

ORCID-Profile: Lei Li

Förderung

  • National Natural Science Foundation of China
  • Key R&D Program of Rizhao City, China
  • China Postdoctoral Science Foundation
  • Key R&D Program of Rizhao City, China
  • China Post-doctoral Science Foundation

Zitieren

APA

Ye, Y., Yang, Z., Qu, D., Hu, B., & Li, L. (2025). Orthotropic Constitutive Modeling and Tsai–Wu Failure Criterion for Carbon Fiber-Reinforced PEEK Composites. Polymers, 17(8), 1076. https://doi.org/10.3390/polym17081076

Vancouver

Ye Y, Yang Z, Qu D, Hu B, Li L. Orthotropic Constitutive Modeling and Tsai–Wu Failure Criterion for Carbon Fiber-Reinforced PEEK Composites. Polymers. 2025;17(8):1076. doi:10.3390/polym17081076

BibTeX
@article{Ye2025,
  author = {Ye, Yu and Yang, Zixin and Qu, Dianwei and Hu, Bingyin and Li, Lei},
  title = {Orthotropic Constitutive Modeling and Tsai–Wu Failure Criterion for Carbon Fiber-Reinforced PEEK Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1076},
  doi = {10.3390/polym17081076}
}
Kostenlos starten →