EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A New Double-Inclination Oblique Model to Simulate Drilling of GFRP/Al-Based Stacks: A Thermomechanical Approach

Brahim Salem, Ali Mkaddem iD, Malek Habak iD, Yousef Dobah iD, Abdessalem Jarraya iD

Polymers · 12.04.2025 · 17 (8) · 1047

DOI: 10.3390/polym17081047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.04.2025. Verfasst von Brahim Salem und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire de Mécanique, Modélisation et Productique (LA2MP), National School of Engineering of Sfax, University of Sfax, Sfax 3038, Tunisia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Jeddahj, Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reports an investigation of the thermomechanical behavior at the interface of GFRP/Al composite stacks when the stacking arrangement varies. A temperature-coupled damage approach was developed to simulate thermal energy transfer and damage propagation at metallic-to-composite interface. The proposed model was then implemented into ABAQUS/Explicit finite element code using user-defined subroutine VUMAT finely imbricated with VDFLUX. Unlike to previous models, oblique cutting configuration (OCC) involving double-inclination of the tool was proposed to simulate finely the material removal process owing to drill action. Drilling trials involving the cutting speed and the stacking arrangement were conducted to support the proposed approach. The predictions revealed that increasing the spindle speed significantly impacts the temperature distribution and subsurface thermal damage. An exponential temperature law was derived for predicting temperature variation with the cutting speed and identifying thermal saturation at the interface. The sensitivity of the composite behavior to the stacking arrangement (GFRP → Al vs. Al → GFRP) was well highlighted. The results indicated that attacking the structure from the GFRP side results in higher interfacial temperatures due to GFRP’s lower thermal conductivity. These findings contribute to understanding the heat-affected zone in GFRP, and, hence, provide guidance to minimize thermal damage in industrial drilling of the hybrid stacks.

Schlagwörter

Stichwörter der Autor:innen

GFRP/AlVDFLUXVUMATdrillingoblique cutting configurationtemperature

Autor:innen und Institutionen

  • Laboratoire de Mécanique, Modélisation et Productique (LA2MP), National School of Engineering of Sfax, University of Sfax, Sfax 3038, Tunisia.
  • Department of Mechanical and Materials Engineering, FOE, University of Jeddah, Jeddah 21589, Saudi Arabia.
  • Laboratoire Roberval, Centre de Recherche de Royallieu, Université de Technologie de Compiègne, Rue du Docteur Schweitzer, CS 60319, 60203 Compiègne, France.

ORCID-Profile: Ali Mkaddem, Malek Habak, Yousef Dobah, Abdessalem Jarraya

Förderung

  • University of Jeddahj
  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia

Zitieren

APA

Salem, B., Mkaddem, A., Habak, M., Dobah, Y., & Jarraya, A. (2025). A New Double-Inclination Oblique Model to Simulate Drilling of GFRP/Al-Based Stacks: A Thermomechanical Approach. Polymers, 17(8), 1047. https://doi.org/10.3390/polym17081047

Vancouver

Salem B, Mkaddem A, Habak M, Dobah Y, Jarraya A. A New Double-Inclination Oblique Model to Simulate Drilling of GFRP/Al-Based Stacks: A Thermomechanical Approach. Polymers. 2025;17(8):1047. doi:10.3390/polym17081047

BibTeX
@article{Salem2025,
  author = {Salem, Brahim and Mkaddem, Ali and Habak, Malek and Dobah, Yousef and Jarraya, Abdessalem},
  title = {A New Double-Inclination Oblique Model to Simulate Drilling of GFRP/Al-Based Stacks: A Thermomechanical Approach},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1047},
  doi = {10.3390/polym17081047}
}
Kostenlos starten →