EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model-Based Prediction of the Tensile Properties of Polypropylene Films Made from Recycled Materials

Marius Stieglitz, Sonja Adomeit iD, Marisa Müller, Karina Hettwer, Anja Schlierf iD, Steffen Uhlig, Sarah David, Christian Hopmann, Lisa Leuchtenberger-Engel

Polymers · 12.04.2025 · 17 (8) · 1044

DOI: 10.3390/polym17081044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.04.2025. Verfasst von Marius Stieglitz und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Plastic Processing (IKV) in Industry and Craft at RWTH Aachen University, Seffenter Weg 201, 52074 Aachen, Germany. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Bundesministerium für Bildung und Forschung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the potential of data-driven modeling to monitor and predict mechanical properties of extruded film using recyclates. The first step is to investigate whether a process parameter can indicate the input material quality of the material, which can vary significantly due to the use of recyclate. The die pressure was shown to be a key indicator due to its strong correlation with viscosity and material degradation. The second step is to explore the ability of machine learning models—Generalized Additive Models, Linear Regression, and Random Forest—to predict film tensile strength and modulus based on extrusion process and material parameters. The results demonstrate that including Melt Flow Rate and shear viscosity in addition to pressure and feedstock type (Virgin, PIR, and PCR) significantly improves model accuracy, with Generalized Additive Models achieving the highest R2 of 85.7% for tensile strength prediction. Additionally, the observed variability between different recyclate streams highlights the need for a more detailed classification of recyclates to better predict and optimize the mechanical performance of the film. While data-driven approaches for predicting properties show promise, their effectiveness remains limited by data availability and feedstock variability. Expanding datasets and improving process stability will be critical to refining predictive models for industrial application.

Schlagwörter

Stichwörter der Autor:innen

flat filmmaterial propertiesmechanical propertiesmodelingrecyclate

Autor:innen und Institutionen

  • Institute for Plastic Processing (IKV) in Industry and Craft at RWTH Aachen University, Seffenter Weg 201, 52074 Aachen, Germany.
  • Ehrenmüller GmbH, An der Stadtmauer 4, 87435 Kempten, Germany.
  • quo data Gesellschaft für Qualitätsmanagement und Statistik mbH, Prellerstraße 14, 01309 Dresden, Germany.

ORCID-Profile: Sonja Adomeit, Anja Schlierf

Förderung

  • German Bundesministerium für Bildung und Forschung

Zitieren

APA

Stieglitz, M., Adomeit, S., Müller, M., Hettwer, K., Schlierf, A., Uhlig, S., David, S., Hopmann, C., & Leuchtenberger-Engel, L. (2025). Model-Based Prediction of the Tensile Properties of Polypropylene Films Made from Recycled Materials. Polymers, 17(8), 1044. https://doi.org/10.3390/polym17081044

Vancouver

Stieglitz M, Adomeit S, Müller M, Hettwer K, Schlierf A, Uhlig S, et al. Model-Based Prediction of the Tensile Properties of Polypropylene Films Made from Recycled Materials. Polymers. 2025;17(8):1044. doi:10.3390/polym17081044

BibTeX
@article{Stieglitz2025,
  author = {Stieglitz, Marius and Adomeit, Sonja and Müller, Marisa and Hettwer, Karina and Schlierf, Anja and Uhlig, Steffen and David, Sarah and Hopmann, Christian and Leuchtenberger-Engel, Lisa},
  title = {Model-Based Prediction of the Tensile Properties of Polypropylene Films Made from Recycled Materials},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1044},
  doi = {10.3390/polym17081044}
}
Kostenlos starten →