EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings

Mehmet İskender Özsoy iD, Sinan Fidan iD, Mustafa Özgür Bora iD, Satılmış Ürgün iD

Polymers · 24.03.2025 · 17 (7) · 866

DOI: 10.3390/polym17070866 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.03.2025. Verfasst von Mehmet İskender Özsoy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Engineering, Sakarya University, Sakarya 54050, Türkiye. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kocaeli Üniversitesi, Kocaeli University Scientific Research Projects Coordination Unit.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the hybrid fiber sequence effect on the flexural and impact properties of basalt/carbon epoxy composites. In the present study, six configurations of composite laminates were fabricated by vacuum-assisted resin transfer method and tested in three-point bending and Charpy impact tests. The results show that hybrid composites outperform pure basalt or carbon laminates. The maximum flexural strength and modulus, such as in [C2B4C2], were realized for the configurations with carbon fibers on the outer layers because of the rigidity of carbon. However, higher energy absorption was offered by the basalt-rich composites because of their ductility. Among the hybrids, a balanced stacking sequence like [C4B4] and [B2C4B2] showed an optimum between stiffness and toughness. Flexural modulus was maximum at 12.1 GPa for carbon-dominant layers, whereas impact resistance was maximum for alternating hybrid layers at 120 kJ/m2. SEM analysis revealed that the dominant mechanisms of failure were delamination at the fiber–matrix interface and fiber pull-out, while the stacking order was critical regarding stress distribution. Hybridization also increased cost-performance metrics by a factor of 40%, as basalt fibers reduced the cost while maintaining acceptable mechanical properties. These results prove the potential of basalt-carbon hybrid for applications requiring high strength, impact resistance, and economic efficiency.

Schlagwörter

Stichwörter der Autor:innen

basalt fibercarbon fiberflexural propertieshybrid compositesimpact resistance

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Engineering, Sakarya University, Sakarya 54050, Türkiye.
  • Department of Airframe & Powerplant Maintenance, Faculty of Aeronautics and Astronautics, Kocaeli University, Kocaeli 41001, Türkiye.
  • Department of Aviation Electrics and Electronics, Faculty of Aeronautics and Astronautics, Kocaeli University, Kocaeli 41001, Türkiye.

ORCID-Profile: Mehmet İskender Özsoy, Sinan Fidan, Mustafa Özgür Bora, Satılmış Ürgün

Förderung

  • Kocaeli Üniversitesi
  • Kocaeli University Scientific Research Projects Coordination Unit

Zitieren

APA

Özsoy, M. İ., Fidan, S., Bora, M. Ö., & Ürgün, S. (2025). Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings. Polymers, 17(7), 866. https://doi.org/10.3390/polym17070866

Vancouver

Özsoy Mİ, Fidan S, Bora MÖ, Ürgün S. Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings. Polymers. 2025;17(7):866. doi:10.3390/polym17070866

BibTeX
@article{zsoy2025,
  author = {Özsoy, Mehmet İskender and Fidan, Sinan and Bora, Mustafa Özgür and Ürgün, Satılmış},
  title = {Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {866},
  doi = {10.3390/polym17070866}
}
Kostenlos starten →