EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Printing Paths on Compressive Strength of 3D-Printed Continuous Fiber-Reinforced Composite Lattice Unit Cell

Min-Hyeok Jeon, Geun Sik Shin iD, Jun Yeon Hwang, Thuan Ho-Nguyen-Tan iD, Minkook Kim iD, Soon Ho Yoon iD

Polymers · 22.03.2025 · 17 (7) · 850

DOI: 10.3390/polym17070850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.03.2025. Verfasst von Min-Hyeok Jeon und 5 weiteren Autor:innen. Beteiligte Einrichtung: Launch Vehicle Structures Team, Korea Aerospace Research Institute, 169-84 Gwahak-ro, Yuseong-gu, Daejeon 34133, South Chungcheong, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, Ministry of Trade, Industry and Energy, Korea Institute of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing is a highly promising manufacturing technology that enables easy production of complex shapes. Composite lattice structures are highly efficient, having the advantages of fiber-reinforced composites and the excellent structural performance of lattice configurations. Highly efficient structures can be developed by combining the benefits of 3D printing and composite lattice structures. This study examined the effect of printing path and axial angle in joint areas on the compressive strength of composite lattice unit cells fabricated via continuous fiber 3D printing. Compression tests were conducted to analyze deformation, failure modes, and causes of failure. A finite element model was used to analyze buckling behavior and establish design criteria. Results showed that the printing path significantly influenced failure mode and strength, while a fabrication method without a defect at the joint was important for improving structural performance. Finally, design criteria, in terms of the knockdown factor and in-plane bifurcation buckling behavior, were developed based on experimental and numerical results.

Schlagwörter

Stichwörter der Autor:innen

3D printingcomposite latticecompressive strengthcontinuous fiberprinting path

Autor:innen und Institutionen

  • Launch Vehicle Structures Team, Korea Aerospace Research Institute, 169-84 Gwahak-ro, Yuseong-gu, Daejeon 34133, South Chungcheong, Republic of Korea.
  • Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), 92 Chudong-ro, Bongdong-eup, Wanju-gun 55324, Jeonbuk, Republic of Korea.

ORCID-Profile: Geun Sik Shin, Thuan Ho-Nguyen-Tan, Minkook Kim, Soon Ho Yoon

Förderung

  • Ministry of Science and ICT
  • Ministry of Trade, Industry and Energy
  • Korea Institute of Science and Technology
  • Commercialization Promotion Agency for R&D Outcomes (COMPA) grant funded by the Korean Government (Ministry of Science and ICT)
  • Korea Institute of Science and Technology (KIST) Institutional Program

Zitieren

APA

Jeon, M. H., Shin, G. S., Hwang, J. Y., Ho-Nguyen-Tan, T., Kim, M., & Yoon, S. H. (2025). Effects of Printing Paths on Compressive Strength of 3D-Printed Continuous Fiber-Reinforced Composite Lattice Unit Cell. Polymers, 17(7), 850. https://doi.org/10.3390/polym17070850

Vancouver

Jeon MH, Shin GS, Hwang JY, Ho-Nguyen-Tan T, Kim M, Yoon SH. Effects of Printing Paths on Compressive Strength of 3D-Printed Continuous Fiber-Reinforced Composite Lattice Unit Cell. Polymers. 2025;17(7):850. doi:10.3390/polym17070850

BibTeX
@article{Jeon2025,
  author = {Jeon, Min-Hyeok and Shin, Geun Sik and Hwang, Jun Yeon and Ho-Nguyen-Tan, Thuan and Kim, Minkook and Yoon, Soon Ho},
  title = {Effects of Printing Paths on Compressive Strength of 3D-Printed Continuous Fiber-Reinforced Composite Lattice Unit Cell},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {850},
  doi = {10.3390/polym17070850}
}
Kostenlos starten →