Molecular Entanglement Facilitated Improvement of Thermal Stability of Cellulose Diacetate
Polymers · 21.03.2025 · 17 (7) · 835
DOI: 10.3390/polym17070835 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.03.2025. Verfasst von Yang Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Key Research and Development Projects of Sichuan Province, "Tianfu Emei" Science and Technology Innovation Leader Program in Sichuan Province, University of Electronic Science and Technology of China Talent Start-up Funds.
Abstract (Originalsprache)
As a renewable and degradable biomass material, cellulose diacetate (CDA) has significant development potential and has gained widespread interest from researchers. However, its poor thermal stability at high temperatures limits its practical use in the extrusion process and restricts its applications in other fields, such as high-heat airflow filters, battery separators and special textile materials. To enhance the thermal stability of CDA, three heat-resistance additives, i.e., polyphenylene sulfide (PPS), polycarbonate (PC) and polyimide (PI), were introduced to synthesize PPS/CDA, PC/CDA and PI/CDA composite materials through melt extrusion. The incorporation of three heat-resistant additives increased the glass transition temperature (Tg), initial melting temperature (Tmi) and final melting temperature (Tmf) of the composites, and it reduced the heat loss at 195 °C. After conducting the isothermal thermogravimetry test for 3 h at 215 °C in an air atmosphere, the weight loss of PPS/CDA, PC/CDA and PI/CDA composites was 4.6%, 4.1% and 3.7%, respectively, which was 5.1% lower than that of pure CDA. Morphology characterization tests using a 3D digital microscope and a field emission scanning electron microscope (FESEM) revealed the compatibility order with CDA as the following: PC > PPS > PI. Additionally, Fourier transform infrared spectroscopy (FT–IR) disclosed that hydrogen bonds were formed between heat-resistant additives and CDA molecules, and the carbonyl groups in CDA showed conjugation and hyperconjugation effects with the benzene rings in the additives. Therefore, the enhanced thermal stability of CDA composites can be attributed to the molecular entanglement and crosslinking between additives and CDA molecules.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China.
- The 46th Institute of Sixth Academy CASIC, Hohhot 010010, China.
- Department of Chemistry, School of Science, Xihua University, Chengdu 610039, China.
ORCID-Profile: Yagang Zhang
Förderung
- the Key Research and Development Projects of Sichuan Province
- "Tianfu Emei" Science and Technology Innovation Leader Program in Sichuan Province
- University of Electronic Science and Technology of China Talent Start-up Funds
- National Natural Science Foundation of China
- Key Research and Development Projects of Sichuan Province
- “Tianfu Emei” Science and Technology Innovation Leader Program in Sichuan Province
Zitieren
APA
Liu, Y., Hu, Y., Chen, J., Yan, Z., Zhao, L., Zhan, F., Wang, J., & Zhang, Y. (2025). Molecular Entanglement Facilitated Improvement of Thermal Stability of Cellulose Diacetate. Polymers, 17(7), 835. https://doi.org/10.3390/polym17070835
Vancouver
Liu Y, Hu Y, Chen J, Yan Z, Zhao L, Zhan F, et al. Molecular Entanglement Facilitated Improvement of Thermal Stability of Cellulose Diacetate. Polymers. 2025;17(7):835. doi:10.3390/polym17070835
BibTeX
@article{Liu2025,
author = {Liu, Yang and Hu, Yin and Chen, Jianyu and Yan, Zongkai and Zhao, Lin and Zhan, Falu and Wang, Junjie and Zhang, Yagang},
title = {Molecular Entanglement Facilitated Improvement of Thermal Stability of Cellulose Diacetate},
journal = {Polymers},
year = {2025},
volume = {17},
number = {7},
pages = {835},
doi = {10.3390/polym17070835}
}
EUVIMED