EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comprehensive Mechanical Testing of Polyacrylamide Hydrogels: The Impact of Crosslink Density

Christina G Antipova iD, Arthur E Krupnin iD, Arthur R Zakirov, Vsevolod V Pobezhimov iD, Daniil A Romanenko iD, Dina Yu Stolyarova iD, Sergei N Chvalun iD, Timofei E Grigoriev

Polymers · 11.03.2025 · 17 (6) · 737

DOI: 10.3390/polym17060737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.03.2025. Verfasst von Christina G Antipova und 7 weiteren Autor:innen. Beteiligte Einrichtung: NRC Kurchatov Institute, pl. Akademika Kurchatova 1, 123098 Moscow, Russia. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical properties are one of the most important characteristics of biomaterials for many different applications, including biomedicine. Soft biomaterials, such as hydrogels, are difficult to characterize by conventional mechanical testing, because their mechanical properties are much lower than required by conventional testing machines. In this work, we aimed to systematically study the mechanical behavior of a model soft material, polyacrylamide hydrogels, under different loading modes: tension, torsion, compression, and indentation. This allowed us to develop a comprehensive approach to the mechanical testing of soft materials. To overcome excessive compression and slippage of the hydrogel samples when fixed in the grips during tension, additional 3D-printed grips were designed. Digital image correlation was used to determine the Poisson’s ratio of the hydrogels. The Young’s modulus values obtained from all types of mechanical tests analyzed were highly correlated. However, for hydrogels with a low crosslinker concentration, 1–2%, tension–compression asymmetry was observed. Moreover, the results of the mechanical tests were verified in indentation tests, including analytical estimation, and full-scale and numerical experiments. We also discuss the limits of using a two-parameter Mooney–Rivlin model for fitting hydrogel uniaxial tension deformation curves, which was unstable for the hydrogels with 4 and 9% crosslinker concentration. The implemented approach provided a comprehensive analysis of the mechanical behavior of biomaterials. The elastic moduli for all hydrogels studied were in the range from 20 to 160 kPa, which corresponds well to human soft tissues, making them a promising material for application as tissue-mimicking phantoms.

Schlagwörter

Stichwörter der Autor:innen

FEAcompressionhydrogel mechanical behaviorhydrogel torsionindentationpolyacrylamide hydrogelstension

Autor:innen und Institutionen

  • NRC Kurchatov Institute, pl. Akademika Kurchatova 1, 123098 Moscow, Russia.
  • MIREA-Russian Technological University, Vernadsky Avenue 86, 119571 Moscow, Russia.
  • Enikolopov Institute of Synthetic Polymeric Materials, Profsoyuznaya 70, 117393 Moscow, Russia.

ORCID-Profile: Christina G Antipova, Arthur E Krupnin, Vsevolod V Pobezhimov, Daniil A Romanenko, Dina Yu Stolyarova, Sergei N Chvalun

Zitieren

APA

Antipova, C. G., Krupnin, A. E., Zakirov, A. R., Pobezhimov, V. V., Romanenko, D. A., Stolyarova, D. Y., Chvalun, S. N., & Grigoriev, T. E. (2025). A Comprehensive Mechanical Testing of Polyacrylamide Hydrogels: The Impact of Crosslink Density. Polymers, 17(6), 737. https://doi.org/10.3390/polym17060737

Vancouver

Antipova CG, Krupnin AE, Zakirov AR, Pobezhimov VV, Romanenko DA, Stolyarova DY, et al. A Comprehensive Mechanical Testing of Polyacrylamide Hydrogels: The Impact of Crosslink Density. Polymers. 2025;17(6):737. doi:10.3390/polym17060737

BibTeX
@article{Antipova2025,
  author = {Antipova, Christina G and Krupnin, Arthur E and Zakirov, Arthur R and Pobezhimov, Vsevolod V and Romanenko, Daniil A and Stolyarova, Dina Yu and Chvalun, Sergei N and Grigoriev, Timofei E},
  title = {A Comprehensive Mechanical Testing of Polyacrylamide Hydrogels: The Impact of Crosslink Density},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {6},
  pages = {737},
  doi = {10.3390/polym17060737}
}
Kostenlos starten →