The Effect of Fiber Weight Fraction on Tribological Behavior for Glass Fiber Reinforced Polymer
Polymers · 09.03.2025 · 17 (6) · 720
DOI: 10.3390/polym17060720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2025. Verfasst von Corina Birleanu und 5 weiteren Autor:innen. Beteiligte Einrichtung: MicroNano Systems Laboratory, Mechanical Systems Engineering Department, Technical University from Cluj-Napoca, Blv. Muncii nr. 103-105, 400641 Cluj-…. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The tribological performance of Glass Fiber Reinforced Polymer (GFRP) composites is essential for applications in automotive, aerospace, and industrial sectors. This study investigates the effect of fiber weight fraction ratio (wf.) (50%, 65%, and 70%), applied load, and sliding speed on the tribological behavior of twill-woven GFRP using a pin-on-disc tribometer. Experimental trials were carried out to assess the impact of control factors on the coefficient of friction, specific wear rate, and contact temperature. Statistical analyses based on generalized linear models (GLM) method or multi-factor ANOVA, identified the most significant factors and their contributions. Results indicate that sliding speed contributes the highest to COF (46.51%), while fiber wf. primarily influences wear rate (34.15%). The applied load was found to have the strongest impact on contact temperature (39.08%). Furthermore, SEM and EDS analyses reveal dominant wear mechanisms, including abrasive wear and transfer layer formation. This study introduces the novelty of using statistical modeling to optimize GFRP for high-performance tribological applications, providing a more precise and efficient approach to enhancing their properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- MicroNano Systems Laboratory, Mechanical Systems Engineering Department, Technical University from Cluj-Napoca, Blv. Muncii nr. 103-105, 400641 Cluj-Napoca, Romania.
- Manufacturing Engineering Department, Transilvania University of Brasov, Blv. Eroilor Nr. 29, 500036 Brașov, Romania.
- Manufacturing Engineering Department, Technical University from Cluj-Napoca, 400641 Cluj-Napoca, Romania.
- Mechanical Engineering Department, Technical University from Cluj-Napoca, 400641 Cluj-Napoca, Romania.
ORCID-Profile: Corina Birleanu, Razvan Udroiu, Marius Pustan, Bere Paul, Cristian Vilau
Zitieren
APA
Birleanu, C., Udroiu, R., Cioaza, M., Pustan, M., Paul, B., & Vilau, C. (2025). The Effect of Fiber Weight Fraction on Tribological Behavior for Glass Fiber Reinforced Polymer. Polymers, 17(6), 720. https://doi.org/10.3390/polym17060720
Vancouver
Birleanu C, Udroiu R, Cioaza M, Pustan M, Paul B, Vilau C. The Effect of Fiber Weight Fraction on Tribological Behavior for Glass Fiber Reinforced Polymer. Polymers. 2025;17(6):720. doi:10.3390/polym17060720
BibTeX
@article{Birleanu2025,
author = {Birleanu, Corina and Udroiu, Razvan and Cioaza, Mircea and Pustan, Marius and Paul, Bere and Vilau, Cristian},
title = {The Effect of Fiber Weight Fraction on Tribological Behavior for Glass Fiber Reinforced Polymer},
journal = {Polymers},
year = {2025},
volume = {17},
number = {6},
pages = {720},
doi = {10.3390/polym17060720}
}
EUVIMED