Preparation of 3-Iodo-2-propargyl-butyl-carbamate-Loaded Microcapsules for Long-Term Mold Resistance in Bamboo
Polymers · 04.03.2025 · 17 (5) · 679
DOI: 10.3390/polym17050679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 04.03.2025. Verfasst von Gege Bao und 5 weiteren Autor:innen. Beteiligte Einrichtung: International Centre for Bamboo and Rattan, Beijing 100102, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Discipline Construction Project of the International Centre for Bamboo and Rattan Sanya Research Base, Key Discipline Construction Project of the International Centre for Bamboo and the Rattan Sanya Research Base.
Abstract (Originalsprache)
Bamboo, recognized as a nutrient-dense biomass material, exhibits a high susceptibility to mold infestations, which can result in discoloration and a notable decrease in longevity, thereby posing potential health risks to humans. In this study, melamine-formaldehyde resin (MFR) was utilized to load 3-iodo-2-propargyl-butyl-carbamate (IPBC) via in situ polymerization, resulting in the preparation of microcapsules suitable for anti-mold protection of bamboo. The mold resistance of Aspergillus niger, Trichoderma viride, and Penicillium citrinum were evaluated. A scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier-transform infrared spectrometer (FTIR), and thermogravimetric analysis (TG) were used to characterize and analyze the formation process, surface morphology, structural composition, and thermal stability of the microcapsules. The effects of different surfactants (Span 80, Tween 80, SDBS, SDS, GA) on the microscopic morphology of the anti-mold microcapsules were investigated. The results show that microcapsules prepared with Tween 80 as the surfactant exhibited good mold resistance. After coating MFR with IPBC, the drug loading of I-MFR is 20%, with an encapsulation efficiency of 80%, demonstrating excellent anti-mold performance. The microcapsules show favorable anti-mold performance and have broad application prospects in bamboo protection.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- International Centre for Bamboo and Rattan, Beijing 100102, China.
- Key Laboratory of National Forestry and Grassland Administration for Bamboo and Rattan Science & Technology, Beijing 100102, China.
- Key Laboratory of High Efficient Processing of Bamboo of Zhejiang Province, China National Bamboo Research Center, Hangzhou 310012, China.
- Sanya Research Base, International Centre for Bamboo and Rattan, Sanya 572000, China.
ORCID-Profile: Jingpeng Li
Förderung
- Key Discipline Construction Project of the International Centre for Bamboo and Rattan Sanya Research Base
- Key Discipline Construction Project of the International Centre for Bamboo and the Rattan Sanya Research Base
Zitieren
APA
Bao, G., He, L., Zhang, X., Yu, X., Li, J., & Qin, D. (2025). Preparation of 3-Iodo-2-propargyl-butyl-carbamate-Loaded Microcapsules for Long-Term Mold Resistance in Bamboo. Polymers, 17(5), 679. https://doi.org/10.3390/polym17050679
Vancouver
Bao G, He L, Zhang X, Yu X, Li J, Qin D. Preparation of 3-Iodo-2-propargyl-butyl-carbamate-Loaded Microcapsules for Long-Term Mold Resistance in Bamboo. Polymers. 2025;17(5):679. doi:10.3390/polym17050679
BibTeX
@article{Bao2025,
author = {Bao, Gege and He, Lu and Zhang, Xiaofeng and Yu, Xi and Li, Jingpeng and Qin, Daochun},
title = {Preparation of 3-Iodo-2-propargyl-butyl-carbamate-Loaded Microcapsules for Long-Term Mold Resistance in Bamboo},
journal = {Polymers},
year = {2025},
volume = {17},
number = {5},
pages = {679},
doi = {10.3390/polym17050679}
}
EUVIMED