Engineering Hydrogels with Enhanced Adhesive Strength Through Optimization of Poly(Ethylene Glycol) Molecular Weight
Polymers · 23.02.2025 · 17 (5) · 589
DOI: 10.3390/polym17050589 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.02.2025. Verfasst von Yin-An Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Chung Yuan Christian University, Taoyuan City 320314, Taiwan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Far Eastern Memorial Hospital National Yang Ming Chiao Tung University Joint Research Pro-gram, National Science and Technology Council of the Republic of China, Taiwan.
Abstract (Originalsprache)
Hydrogels are extensively utilized in biomedical fields because of their remarkable properties, including biocompatibility, high water content, flexibility, and elasticity. However, despite substantial progress in hydrogel research, creating a hydrogel adhesive that integrates high stretchability, fatigue resistance, and reversible adhesion continues to pose significant challenges. In this study, we aimed to address these challenges by preparing hydrogels using a combination of acrylic acid, acrylamide, carboxymethylcellulose methacrylate, thiol-functionalized polyhedral oligomeric silsesquioxane, and poly(ethylene glycol) dimethacrylate (PEGDM). By systematically varying the molecular weight of PEG, we were able to precisely adjust the mechanical and adhesive properties of the hydrogels. Our research revealed that a PEG molecular weight of 2000 (resulting in P1 hydrogel) provided a notable adhesive strength of 717.2 kPa on glass surfaces. This performance is particularly impressive given the challenges associated with achieving high adhesive strength while maintaining other desirable hydrogel properties. Beyond its strong adhesive capabilities, the P1 hydrogel also demonstrated exceptional stretchability, support, and fatigue resistance. These characteristics are crucial for applications where the adhesive needs to endure repeated stress and deformation without losing effectiveness. The successful development of P1 hydrogel underscores its potential as a multifunctional adhesive material with a broad range of applications. The ability to tailor the properties of hydrogels through molecular weight adjustments offers a promising approach to creating advanced adhesive solutions that meet the demanding requirements of modern biomedical and industrial applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, Chung Yuan Christian University, Taoyuan City 320314, Taiwan.
- Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 300093, Taiwan.
- Department of Orthopaedic Surgery, Far Eastern Memorial Hospital, New Taipei City 220216, Taiwan.
- Center for Intelligent Drug Systems and Smart Bio-Devices (IDS2B), National Yang Ming Chiao Tung University, Hsinchu 30068, Taiwan.
ORCID-Profile: Rajan Deepan Chakravarthy, Karl Wu, Mei-Yu Yeh
Förderung
- National Science and Technology Council
- Far Eastern Memorial Hospital National Yang Ming Chiao Tung University Joint Research Pro-gram
- National Science and Technology Council of the Republic of China, Taiwan
- Far Eastern Memorial Hospital National Yang Ming Chiao Tung University Joint Research Program
- FEMH-NYCU Joint Research Program
- Ministry of Education (MOE) in Taiwan
Zitieren
APA
Yang, Y. A., Ni, Y. F., Chakravarthy, R. D., Wu, K., Yeh, M. Y., & Lin, H. C. (2025). Engineering Hydrogels with Enhanced Adhesive Strength Through Optimization of Poly(Ethylene Glycol) Molecular Weight. Polymers, 17(5), 589. https://doi.org/10.3390/polym17050589
Vancouver
Yang YA, Ni YF, Chakravarthy RD, Wu K, Yeh MY, Lin HC. Engineering Hydrogels with Enhanced Adhesive Strength Through Optimization of Poly(Ethylene Glycol) Molecular Weight. Polymers. 2025;17(5):589. doi:10.3390/polym17050589
BibTeX
@article{Yang2025,
author = {Yang, Yin-An and Ni, Yu-Feng and Chakravarthy, Rajan Deepan and Wu, Karl and Yeh, Mei-Yu and Lin, Hsin-Chieh},
title = {Engineering Hydrogels with Enhanced Adhesive Strength Through Optimization of Poly(Ethylene Glycol) Molecular Weight},
journal = {Polymers},
year = {2025},
volume = {17},
number = {5},
pages = {589},
doi = {10.3390/polym17050589}
}
EUVIMED