ZnO-Embedded Carboxymethyl Cellulose Bioplastic Film Synthesized from Sugarcane Bagasse for Packaging Applications
Polymers · 22.02.2025 · 17 (5) · 579
DOI: 10.3390/polym17050579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 22.02.2025. Verfasst von Anand Vyas und 3 weiteren Autor:innen. Beteiligte Einrichtung: Division of Science, Engineering and Health Studies, SPEED, The Hong Kong Polytechnic University, Hong Kong 999077, China. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SEHS-KML, SPEED, HKPolyU, KML Foundation.
Abstract (Originalsprache)
This research explores the synthesis of carboxymethyl cellulose (CMC) for the development of a cost-effective bioplastic film that can serve as a sustainable alternative to synthetic plastic. Replacing plastic packaging with CMC-based films offers a solution for mitigating environmental pollution, although the inherent hydrophilicity and low mechanical strength of CMC present significant challenges. To address these limitations, zinc oxide nanoparticles (ZnO NPs) were employed as a biocompatible and non-toxic reinforcement filler to improve CMC’s properties. A solution casting method which incorporated varying concentrations of ZnO NPs (0%, 5%, 10%, 15%, 20%, and 25%) into the CMC matrix allowed for the preparation of composite bioplastic films, the physicochemical properties of which were analyzed using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results revealed that the ZnO NPs were well-integrated into the CMC matrix, thereby improving the film’s crystallinity, with a significant shift from amorphousness to the crystalline phase. The uniform dispersion of ZnO NPs and the development of hydrogen bonding between ZnO and the CMC matrix resulted in enhanced mechanical properties, with the film CZ20 exhibiting the greatest tensile strength—15.12 ± 1.28 MPa. This film (CZ20) was primarily discussed and compared with the control film in additional comparison graphs. Thermal stability, assessed via thermogravimetric analysis, improved with an increasing percentage of ZnO Nps, while a substantial decrease in water vapor permeability and oil permeability coefficients was observed. In addition, such water-related properties as water contact angle, moisture content, and moisture absorption were also markedly improved. Furthermore, biodegradability studies demonstrated that the films decomposed by 71.43% to 100% within 7 days under ambient conditions when buried in soil. Thus, CMC-based eco-friendly composite films have the clear potential to become viable replacements for conventional plastics in the packaging industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Science, Engineering and Health Studies, SPEED, The Hong Kong Polytechnic University, Hong Kong 999077, China.
- Key Laboratory of Biomedical Information Engineering of Ministry of Education, School of Life Science and Technology, Xi'an Jiaotong University, Xi'an 710049, China.
ORCID-Profile: Anand Vyas, Tao Fu
Förderung
- SEHS-KML, SPEED, HKPolyU
- KML Foundation
Zitieren
APA
Vyas, A., Ng, S. P., Fu, T., & Anum, I. (2025). ZnO-Embedded Carboxymethyl Cellulose Bioplastic Film Synthesized from Sugarcane Bagasse for Packaging Applications. Polymers, 17(5), 579. https://doi.org/10.3390/polym17050579
Vancouver
Vyas A, Ng SP, Fu T, Anum I. ZnO-Embedded Carboxymethyl Cellulose Bioplastic Film Synthesized from Sugarcane Bagasse for Packaging Applications. Polymers. 2025;17(5):579. doi:10.3390/polym17050579
BibTeX
@article{Vyas2025,
author = {Vyas, Anand and Ng, Sun-Pui and Fu, Tao and Anum, Ifrah},
title = {ZnO-Embedded Carboxymethyl Cellulose Bioplastic Film Synthesized from Sugarcane Bagasse for Packaging Applications},
journal = {Polymers},
year = {2025},
volume = {17},
number = {5},
pages = {579},
doi = {10.3390/polym17050579}
}
EUVIMED