EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Extracted Spent Coffee Grounds as a Performance-Enhancing Additive for Poly(Lactic Acid) Biodegradable Nursery Bags in Agriculture

Amonrut Waisarikit iD, Nattawut Suadaung, Benjawan Khantho, Bawan Hadad iD, Gareth M Ross iD, Paul D Topham iD, Sukunya Ross iD, Sararat Mahasaranon iD

Polymers · 20.02.2025 · 17 (5) · 561

DOI: 10.3390/polym17050561 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.02.2025. Verfasst von Amonrut Waisarikit und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center of Excellence in Biomaterials, Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces biodegradable nursery bags using poly(lactic acid) (PLA), a widely used biodegradable polymer, and spent coffee grounds (SCGs), a byproduct of the brewing process in the coffee industry. SCGs were oil-extracted to produce extracted spent coffee grounds (exSCGs), which were characterized by their physical properties, chemical functionality, and thermal behavior. The exSCGs were blended with PLA at loadings of 5, 10, and 15 wt%. Analysis showed that exSCGs retained 3–5 wt% residual coffee oil, exhibiting a lower surface area (1.1163 m2/g) compared to SCGs (1.5010 m2/g), along with a higher pore volume (1.148 × 10−3 cm3/g) and pore size (~410 nm). All PLA/exSCG bio-composite films displayed a light brown color, well-dispersed exSCG particles, and excellent UV light barrier properties, with transmittance reduced to 1–2%. The residual coffee oil acted as a plasticizer, reducing the glass transition temperature, melting temperature, and crystallinity with increasing exSCG content. Mechanical testing revealed enhanced flexibility compared to neat PLA. Soil burial tests showed increased biodegradability with higher exSCG content, supported by SEM analysis revealing cracks around exSCG particles. The PLA/exSCG blend containing 10 wt% exSCGs exhibited optimal performance, with a significant increase in melt flow index (from 4.22 to 8.17 g/10 min) and approximately double the melt strength of neat PLA, balancing processability and mechanical properties. This innovation provides a sustainable alternative to plastic nursery bags, addressing waste valorization and promoting eco-friendly material development for agricultural applications.

Schlagwörter

Stichwörter der Autor:innen

agricultural bioplasticgreen compositenursery biodegradable bagpoly(lactic acid)spent coffee grounds

Autor:innen und Institutionen

  • Center of Excellence in Biomaterials, Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand.
  • Aston Institute for Membrane Excellence (AIME), Aston University, Birmingham B4 7ET, UK.

ORCID-Profile: Amonrut Waisarikit, Bawan Hadad, Gareth M Ross, Paul D Topham, Sukunya Ross, Sararat Mahasaranon

Zitieren

APA

Waisarikit, A., Suadaung, N., Khantho, B., Hadad, B., Ross, G. M., Topham, P. D., Ross, S., & Mahasaranon, S. (2025). Extracted Spent Coffee Grounds as a Performance-Enhancing Additive for Poly(Lactic Acid) Biodegradable Nursery Bags in Agriculture. Polymers, 17(5), 561. https://doi.org/10.3390/polym17050561

Vancouver

Waisarikit A, Suadaung N, Khantho B, Hadad B, Ross GM, Topham PD, et al. Extracted Spent Coffee Grounds as a Performance-Enhancing Additive for Poly(Lactic Acid) Biodegradable Nursery Bags in Agriculture. Polymers. 2025;17(5):561. doi:10.3390/polym17050561

BibTeX
@article{Waisarikit2025,
  author = {Waisarikit, Amonrut and Suadaung, Nattawut and Khantho, Benjawan and Hadad, Bawan and Ross, Gareth M and Topham, Paul D and Ross, Sukunya and Mahasaranon, Sararat},
  title = {Extracted Spent Coffee Grounds as a Performance-Enhancing Additive for Poly(Lactic Acid) Biodegradable Nursery Bags in Agriculture},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {561},
  doi = {10.3390/polym17050561}
}
Kostenlos starten →