EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Modification on Properties of Wood Flour/PBAT Biocomposites

Wangwang Yu iD, Rui Qiu, Wen Lei, Yong Chen

Polymers · 20.02.2025 · 17 (5) · 555

DOI: 10.3390/polym17050555 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.02.2025. Verfasst von Wangwang Yu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Province Qinglan Project, The Foundation of the Jiangsu Province Precision Manufacturing Engineering and Technology Research Center.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wood flour (WF)-reinforced poly (butylene adipate-co-terephthalate) (PBAT) composites were successfully fabricated by injection-molding process after being mixed using an extruder. The effects of fiber modifications, including mercerization, acetylation, as well as coupling agent treatment on the properties of WF/PBAT composites, were studied. The results indicated that all the modifications increased the mechanical properties (e.g., tensile strength, tensile modulus, flexural strength, flexural modulus, elongation at break, and Charpy impact strength) of the composites. After modification, all the composites showed better interfacial bonding, hydrophobicity, and thermal properties compared to the untreated fiber composites; meanwhile, the moisture absorption test showed that all the modified fiber composites exhibited a much lower saturated water absorption rate than untreated ones. WF modification by addition of a coupling agent could improve the properties most obviously, except for the tensile strength, elongation at break, and saturated water absorption rate. By this modification, the tensile modulus, flexural strength, flexural modulus, impact strength, onset temperature during thermal degradation, degree of crystallinity, and water contact angle of the composite were 313.47 MPa, 20.55 MPa, 830.79 MPa, 16.01 kJ/cm2, 367.71 °C, 17.10%, and 101.8°, all increased from those of untreated composites by 17.95%, 30.73%, 87.52%, 35.79%, 61.49%, 25.67 °C, 89.16%, and 6.6°, respectively.

Schlagwörter

Stichwörter der Autor:innen

biodegradablecompositepoly (butylene adipate-co-terephthalate)propertywood flour

Autor:innen und Institutionen

  • School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
  • College of Science, Nanjing Forestry University, Nanjing 210037, China.
  • Shanghai Hongrui Biotech. Co., Ltd., Shanghai 201199, China.

ORCID-Profile: Wangwang Yu

Förderung

  • Jiangsu Province Qinglan Project
  • The Foundation of the Jiangsu Province Precision Manufacturing Engineering and Technology Research Center

Zitieren

APA

Yu, W., Qiu, R., Lei, W., & Chen, Y. (2025). Effects of Modification on Properties of Wood Flour/PBAT Biocomposites. Polymers, 17(5), 555. https://doi.org/10.3390/polym17050555

Vancouver

Yu W, Qiu R, Lei W, Chen Y. Effects of Modification on Properties of Wood Flour/PBAT Biocomposites. Polymers. 2025;17(5):555. doi:10.3390/polym17050555

BibTeX
@article{Yu2025,
  author = {Yu, Wangwang and Qiu, Rui and Lei, Wen and Chen, Yong},
  title = {Effects of Modification on Properties of Wood Flour/PBAT Biocomposites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {555},
  doi = {10.3390/polym17050555}
}
Kostenlos starten →