Conducting Rubber Anisotropy of Electrophysical and Mechanical Properties
Polymers · 14.02.2025 · 17 (4) · 492
DOI: 10.3390/polym17040492 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.02.2025. Verfasst von Stanislav Makhno und 12 weiteren Autor:innen. Beteiligte Einrichtung: Ningbo Sino-Ukrainian New Materials Industrial Technologies Institute, Kechuang Building, N777 Zhongguan Road, Ningbo 315211, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Sino-Ukrainian New Materials Industrial Technologies Institute (China).
Abstract (Originalsprache)
The aim of this work was to determine the anisotropy of the electrophysical and mechanical properties of rubber reinforced with a hybrid filler CNTs&CB (carbon nanotubes and carbon black) as a function of CNT content and the technological parameters of the production process. A significant difference in electrical conductivity (σ) and dielectric permittivity (ε) in three perpendicular directions was found for CNT concentrations ranging from 0 to 0.007 in volume fraction. The highest values of σ and ε were observed in the calendering direction, with slightly lower values in the perpendicular direction. This effect was attributed to the orientation of polymer molecules and CNTs along the direction of movement during calendering, as well as the disruption of the cluster structure in the transverse direction. Although the calculated percolation threshold values of the investigated system differed slightly, a correlation was observed between the mechanical and electrophysical properties of CNTs&CB rubber. This correlation enables rubber products to be designed with optimal properties tailored to the desired direction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ningbo Sino-Ukrainian New Materials Industrial Technologies Institute, Kechuang Building, N777 Zhongguan Road, Ningbo 315211, China.
- O. Chuiko Institute of Surface Chemistry NAS of Ukraine, 17, General Naumov Street, 03164 Kyiv, Ukraine.
- School of Materials and Chemical Engineering, School of Safety Engineering, Ningbo University of Technology, 201 Fenghua Road, Ningbo 315211, China.
- Institute of Macromolecular Chemistry, NAS of Ukraine, 48 Kharkiv Highway, 02160 Kyiv, Ukraine.
- Department of Analytical, Physical and Colloid Chemistry, Pharmaceutical Faculty, Bogomolets National Medical University, 13 T. Shevchenko blvd., 01601 Kyiv, Ukraine.
- School of Science, Westlake University, Hangzhou 310024, China.
ORCID-Profile: Xianpeng Wan, Oksana Lisova, Hao Tang, Maksym Stetsenko, Yurii Sementsov
Förderung
- Ningbo Sino-Ukrainian New Materials Industrial Technologies Institute (China)
Zitieren
APA
Makhno, S., Wan, X., Lisova, O., Gorbyk, P., Wang, D., Tang, H., Shi, Y., Kartel, M., Ivanenko, K., Hozhdzinskyi, S., Zaitseva, G., Stetsenko, M., & Sementsov, Y. (2025). Conducting Rubber Anisotropy of Electrophysical and Mechanical Properties. Polymers, 17(4), 492. https://doi.org/10.3390/polym17040492
Vancouver
Makhno S, Wan X, Lisova O, Gorbyk P, Wang D, Tang H, et al. Conducting Rubber Anisotropy of Electrophysical and Mechanical Properties. Polymers. 2025;17(4):492. doi:10.3390/polym17040492
BibTeX
@article{Makhno2025,
author = {Makhno, Stanislav and Wan, Xianpeng and Lisova, Oksana and Gorbyk, Petro and Wang, Dongxing and Tang, Hao and Shi, Yuli and Kartel, Mykola and Ivanenko, Kateryna and Hozhdzinskyi, Sergii and Zaitseva, Galyna and Stetsenko, Maksym and Sementsov, Yurii},
title = {Conducting Rubber Anisotropy of Electrophysical and Mechanical Properties},
journal = {Polymers},
year = {2025},
volume = {17},
number = {4},
pages = {492},
doi = {10.3390/polym17040492}
}
EUVIMED