Optical Behavior of Clear Thermoplastic Dental Materials in a Simulated Oral Environment
Polymers · 11.02.2025 · 17 (4) · 472
DOI: 10.3390/polym17040472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.02.2025. Verfasst von Liliana Porojan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VICTOR BABES UNIVERSITY OF MEDICINE AND PHARMACY TIMISOARA.
Abstract (Originalsprache)
(1)
Background
The intra-oral behavior of clear thermoplastic dental materials can be influenced by various intrinsic and extrinsic factors.
Aim
The purpose of this in vitro study was to evaluate the optical properties, color changes and whiteness variations of four thermoplastic polymers used for dental appliances, in a simulated oral environment. (2)
Methods
Customized thermoformed specimens of four PETG thermoplastics were selected and investigated in this study: Leone [L], Duran [D], Erkodur [E] and Crystal [C]. The thermoplastic samples were divided into three groups related to pH values (neutral, acidic and basic). A period of 14 days was simulated. Five stages resulted: I. dessicated specimens; II. hydrated in artificial saliva; III. subsequent desiccated; IV. artificial aged; V. further dessicated. Optical CIE L*a*b* coordinates were determined and optical properties, like TP (translucency), OP (opalescence) values, color differences ΔE-NBS, white indexes in dentistry WID and white index differences ΔWID were calculated for all stages of the study, for each group of the materials. Statistical analyses were performed. (3)
Results
Optical properties of PETG clear thermoplastic materials, like TP and OP, increase in a simulated oral environment and the changes become significant after artificial aging. Related to pH values, the optical behavior between the materials is significantly different. During artificial aging, the tested materials behave significantly differently in terms of optical properties. (4)
Conclusions
After the simulated period of 14 days, TP and OP values increase, with a migration of the color towards red and yellow. Color changes in some cases even reach the level of extremely marked. Whiteness increases, and the differences are mostly perceptible, but partially exceed the limit of acceptability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, "Victor Babeș" University of Medicine and Pharmacy Timișoara, Eftimi…
- Department of Preventive, Community Dentistry and Oral Health, Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, "Victor Babeș" University of Medicine and Pharmacy Timișoara, Eftimie…
ORCID-Profile: Liliana Porojan, Flavia Roxana Bejan, Anamaria Matichescu
Förderung
- VICTOR BABES UNIVERSITY OF MEDICINE AND PHARMACY TIMISOARA
Zitieren
APA
Porojan, L., Bejan, F. R., Vasiliu, R. D., & Matichescu, A. (2025). Optical Behavior of Clear Thermoplastic Dental Materials in a Simulated Oral Environment. Polymers, 17(4), 472. https://doi.org/10.3390/polym17040472
Vancouver
Porojan L, Bejan FR, Vasiliu RD, Matichescu A. Optical Behavior of Clear Thermoplastic Dental Materials in a Simulated Oral Environment. Polymers. 2025;17(4):472. doi:10.3390/polym17040472
BibTeX
@article{Porojan2025,
author = {Porojan, Liliana and Bejan, Flavia Roxana and Vasiliu, Roxana Diana and Matichescu, Anamaria},
title = {Optical Behavior of Clear Thermoplastic Dental Materials in a Simulated Oral Environment},
journal = {Polymers},
year = {2025},
volume = {17},
number = {4},
pages = {472},
doi = {10.3390/polym17040472}
}
EUVIMED