Numerical Simulation of Fatigue Damage in Cross-Ply CFRP Laminates: Exploring Frequency Dependence and Internal Heat Generation Effects
Polymers · 06.02.2025 · 17 (3) · 432
DOI: 10.3390/polym17030432 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 06.02.2025. Verfasst von Natsuko Kudo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Technology, Graduate School of Tokyo University of Science, 6-3-1 Niijuku, Katsushika-ku, Tokyo 125-8585, Japan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JST-Mirai Program.
Abstract (Originalsprache)
A numerical simulation investigating the frequency dependence of fatigue damage progression in carbon fiber-reinforced plastics (CFRPs) is conducted in this study. The initiation and propagation of transverse cracks under varying fatigue test frequencies are successfully simulated, consistent with experiments, using an enhanced degradable Hashin failure model that was originally developed by the authors in 2022. The results obtained from the numerical simulation in the present study, which employs adjusted numerical values for the purpose of damage acceleration, indicate that the number of cycles required for the formation of three transverse cracks was 174 cycles at 0.1 Hz, 209 cycles at 1 Hz, and 165 cycles at 10 Hz. Based on these results, it is demonstrated that under high-frequency cyclic loading, internal heat generation caused by dissipated energy from mechanical deformation, attributed to the viscoelastic and/or plastic behavior of the material, exceeds thermal dissipation to the environment, leading to an increase in specimen temperature. Consequently, damage progression accelerates under high-frequency fatigue. In contrast, under low-frequency fatigue, viscoelastic dissipation becomes more pronounced, reducing the number of cycles required to reach a similar damage state. The rate of damage accumulation initially increases with test frequency but subsequently decreases. This observation underscores the importance of incorporating these findings into discussions on the fatigue damage of real structural components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Technology, Graduate School of Tokyo University of Science, 6-3-1 Niijuku, Katsushika-ku, Tokyo 125-8585, Japan.
- Department of Mechanical Engineering, The University of Akron, 244 Sumner St., Akron, OH 44325-3903, USA.
- Department of Mechanical and Aerospace Engineering, Tokyo University of Science, 2641 Yamazaki, Noda-shi, Chiba-ken 278-8510, Japan.
- Department of Materials Science and Technology, Tokyo University of Science, 6-3-1 Niijuku, Katsushika-ku, Tokyo 125-8585, Japan.
ORCID-Profile: M J Mohammad Fikry, Jun Koyanagi
Förderung
- JST-Mirai Program
Zitieren
APA
Kudo, N., Fikry, M. J. M., Ogihara, S., & Koyanagi, J. (2025). Numerical Simulation of Fatigue Damage in Cross-Ply CFRP Laminates: Exploring Frequency Dependence and Internal Heat Generation Effects. Polymers, 17(3), 432. https://doi.org/10.3390/polym17030432
Vancouver
Kudo N, Fikry MJM, Ogihara S, Koyanagi J. Numerical Simulation of Fatigue Damage in Cross-Ply CFRP Laminates: Exploring Frequency Dependence and Internal Heat Generation Effects. Polymers. 2025;17(3):432. doi:10.3390/polym17030432
BibTeX
@article{Kudo2025,
author = {Kudo, Natsuko and Fikry, M J Mohammad and Ogihara, Shinji and Koyanagi, Jun},
title = {Numerical Simulation of Fatigue Damage in Cross-Ply CFRP Laminates: Exploring Frequency Dependence and Internal Heat Generation Effects},
journal = {Polymers},
year = {2025},
volume = {17},
number = {3},
pages = {432},
doi = {10.3390/polym17030432}
}
EUVIMED