EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Hg0 Removal Performance of MIL-101(Cr)-Derived Carbon Matrix Composites

Haotian Nie, Zikuo Li, Xikai Zhang, Jinchao Wen, Youxiang Feng, Yue Yu, Li Jia iD

Polymers · 04.02.2025 · 17 (3) · 413

DOI: 10.3390/polym17030413 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.02.2025. Verfasst von Haotian Nie und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Electrical and Power Engineering, Taiyuan University of Technology, Taiyuan 030024, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Power System and Generation Equipment, Fundamental Research Program of Shanxi Province, Research and Innovation Program for Postgraduate of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The temperature at which pollutants are treated varies across different industrial processes. To address the high cost of raw materials for MOFs and the low efficiency of Hg0 removal in low-temperature environments, a series of MIL-101(Cr)-derived carbon matrix composite materials were prepared by combining MIL-101(Cr) with biomass and multiple metals. These materials were synthesized through a sol-gel method followed by carbonization. This study investigates the effects of composite ratios and adsorption temperatures on Hg0 removal, utilizing XRD, BET, and other characterization techniques to elucidate the mercury-removal mechanism of the PDC-MIL composite materials. The results indicate that MIL101(Cr) significantly influences the formation of the gel skeleton. When the composite ratio of MIL-101(Cr) to biomass is 1:1, the material exhibits an optimal pore structure, leading to high Hg0 removal efficiency over a wide temperature range. The removal of Hg0 by these composite materials involves both physical adsorption and chemisorption. Low temperatures favor physical adsorption, while high temperatures promote chemisorption. The sol-gel composite method facilitates cross-linking polymerization between MOFs and SiO2, enabling better pore structure connectivity with biomass and MOFs, thereby optimizing the poor pore structure observed after pyrolysis. Consequently, the improved pore structure enhances physical adsorption at low temperatures, mitigates desorption at high temperatures, and increases the contact probability of Hg0 with active sites within the pores, significantly improving the mercury-removal ability of the material across a broad temperature range.

Schlagwörter

Stichwörter der Autor:innen

MIL-101(Cr)biocharcompositesmercury removal

Autor:innen und Institutionen

  • College of Electrical and Power Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
  • College of Economics and Management, Taiyuan University of Technology, Taiyuan 030024, China.

ORCID-Profile: Li Jia

Förderung

  • State Key Laboratory of Power System and Generation Equipment
  • Fundamental Research Program of Shanxi Province
  • Research and Innovation Program for Postgraduate of Shanxi Province

Zitieren

APA

Nie, H., Li, Z., Zhang, X., Wen, J., Feng, Y., Yu, Y., & Jia, L. (2025). Preparation and Hg0 Removal Performance of MIL-101(Cr)-Derived Carbon Matrix Composites. Polymers, 17(3), 413. https://doi.org/10.3390/polym17030413

Vancouver

Nie H, Li Z, Zhang X, Wen J, Feng Y, Yu Y, et al. Preparation and Hg0 Removal Performance of MIL-101(Cr)-Derived Carbon Matrix Composites. Polymers. 2025;17(3):413. doi:10.3390/polym17030413

BibTeX
@article{Nie2025,
  author = {Nie, Haotian and Li, Zikuo and Zhang, Xikai and Wen, Jinchao and Feng, Youxiang and Yu, Yue and Jia, Li},
  title = {Preparation and Hg0 Removal Performance of MIL-101(Cr)-Derived Carbon Matrix Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {413},
  doi = {10.3390/polym17030413}
}
Kostenlos starten →