EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Laser Direct Transmission Welding of Transparent Polystyrene and Polycarbonate Based on Laser Surface Modification

Kehui Zhai, Fuhao Yang, Qiyan Gu, Yu Lin, Minqiu Liu, Deqin Ouyang, Yewang Chen, Ying Zhang, Qitao Lue, Shuangchen Ruan

Polymers · 04.02.2025 · 17 (3) · 409

DOI: 10.3390/polym17030409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.02.2025. Verfasst von Kehui Zhai und 9 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Optical Precision Manufacturing Technology of Guangdong Higher Education Institutes, Sino-German College of Intelligent Ma…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong S&T Programme, Shenzhen Pingshan District Science and Technology Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The conventional near-infrared laser transmission welding (LTW) process for joining dissimilar transparent polymers is limited by the need to incorporate optical absorbents, which compromises joint performance and raises biocompatibility concerns. To address these issues, this study proposed a surface modification technique using femtosecond laser ablation prior to the welding process. Experiments involved 520 nm femtosecond laser ablation of transparent polymers, followed by LTW of dissimilar transparent polymers using an 808 nm laser, with subsequent characterization and mechanical property evaluations. A maximum joint strength of 13.65 MPa was achieved. A comprehensive investigation was conducted into the physical and chemical mechanisms through which laser ablation improved the welding performance of dissimilar transparent polymers. The results demonstrated that laser ablation generated microstructures that serve as substitutes for optical absorbents while also facilitating the formation of numerous oxygen-containing functional groups. These enhancements improve miscibility and bonding performance between dissimilar polymers, enabling absorbent-free welding between ablated polycarbonate (PC) and polystyrene (PS). This work confirms both the feasibility and potential application of this process for direct LTW of dissimilar transparent polymers.

Schlagwörter

Stichwörter der Autor:innen

absorbent freelaser surface modificationlaser transmission weldingmiscibilitywelding performance

Autor:innen und Institutionen

  • Key Laboratory of Advanced Optical Precision Manufacturing Technology of Guangdong Higher Education Institutes, Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen 518118, China.
  • College of Applied Technology, Shenzhen University, Shenzhen 518060, China.
  • Shenzhen Key Laboratory of Laser Engineering, Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronics Engineering, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, Chin…

Förderung

  • Guangdong S&T Programme
  • Shenzhen Pingshan District Science and Technology Innovation

Zitieren

APA

Zhai, K., Yang, F., Gu, Q., Lin, Y., Liu, M., Ouyang, D., Chen, Y., Zhang, Y., Lue, Q., & Ruan, S. (2025). Research on Laser Direct Transmission Welding of Transparent Polystyrene and Polycarbonate Based on Laser Surface Modification. Polymers, 17(3), 409. https://doi.org/10.3390/polym17030409

Vancouver

Zhai K, Yang F, Gu Q, Lin Y, Liu M, Ouyang D, et al. Research on Laser Direct Transmission Welding of Transparent Polystyrene and Polycarbonate Based on Laser Surface Modification. Polymers. 2025;17(3):409. doi:10.3390/polym17030409

BibTeX
@article{Zhai2025,
  author = {Zhai, Kehui and Yang, Fuhao and Gu, Qiyan and Lin, Yu and Liu, Minqiu and Ouyang, Deqin and Chen, Yewang and Zhang, Ying and Lue, Qitao and Ruan, Shuangchen},
  title = {Research on Laser Direct Transmission Welding of Transparent Polystyrene and Polycarbonate Based on Laser Surface Modification},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {409},
  doi = {10.3390/polym17030409}
}
Kostenlos starten →