EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure

Giulia Bernagozzi iD, Rossella Arrigo iD, Alberto Frache iD

Polymers · 30.01.2025 · 17 (3) · 382

DOI: 10.3390/polym17030382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.01.2025. Verfasst von Giulia Bernagozzi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, Politecnico di Torino, Viale Teresa Michel 5, 15121 Alessandria, Italy. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) - MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.3 - D.D. 1551.11-10-2022, European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.3—D.D. 1551.11-10-2022.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical recycling of thermoplastics (especially of polyolefins) often results in recyclates with inferior properties compared to their virgin counterparts. This phenomenon is mainly due to the modification of the polymer microstructure induced by the degradation processes undergone by the materials during their service life and reprocessing. In this work, a promising route for obtaining high-melt-strength recycled high-density polyethylene (HDPE) is proposed. In particular, the exploited approach involves the utilization of a commercially available additive (i.e., Nexamite® R305, Nexam Chemical, Lomma, Sweden), which was demonstrated to be capable of driving thermo-mechanical degradation reactions (experienced by HDPE during mechanical recycling) towards the obtainment of a long-chain branched microstructure, thereby enabling the further processing of the recycled material through technologies dominated by elongational flow. The additive-induced alterations of the polymer microstructure were exploited for the formulation of fibers, and the performed tensile characterization showed that the additive-containing material exhibits strikingly improved ductility (namely, elongation at break of 350% for the fibers stretched at a draw ratio of 60) with respect to pristine recycled HDPE. Overall, the obtained results clearly demonstrated the possibility of attaining an effective upcycling of HDPE, which could be exploited for industrially relevant high-added-value applications, hence paving the way for the achievement of full plastic circularity.

Schlagwörter

Stichwörter der Autor:innen

HDPEmechanical recyclingmelt strengthplastic circularityupcycling

Autor:innen und Institutionen

  • Department of Applied Science and Technology, Politecnico di Torino, Viale Teresa Michel 5, 15121 Alessandria, Italy.
  • Local INSTM Unit, 15121 Alessandria, Italy.

ORCID-Profile: Giulia Bernagozzi, Rossella Arrigo, Alberto Frache

Förderung

  • European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) - MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.3 - D.D. 1551.11-10-2022
  • European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.3—D.D. 1551.11-10-2022

Zitieren

APA

Bernagozzi, G., Arrigo, R., & Frache, A. (2025). High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure. Polymers, 17(3), 382. https://doi.org/10.3390/polym17030382

Vancouver

Bernagozzi G, Arrigo R, Frache A. High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure. Polymers. 2025;17(3):382. doi:10.3390/polym17030382

BibTeX
@article{Bernagozzi2025,
  author = {Bernagozzi, Giulia and Arrigo, Rossella and Frache, Alberto},
  title = {High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {382},
  doi = {10.3390/polym17030382}
}
Kostenlos starten →