EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tuning the Compatibilizer Content and Healing Temperature in Thermally Mendable Polyamide 6/Cyclic Olefin Copolymer Blends

Davide Perin iD, Luigi Botta iD, Daniele Rigotti iD, Andrea Dorigato, Giulia Fredi iD, Alessandro Pegoretti iD

Polymers · 22.01.2025 · 17 (3) · 280

DOI: 10.3390/polym17030280 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.01.2025. Verfasst von Davide Perin und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123 Trento, Italy. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the formulation and comprehensive characterization of compatibilized polyamide 6 (PA6)/cyclic olefin copolymer (COC) blends with the aim of developing a self-healing matrix for thermoplastic structural composites. Rheological analysis highlighted the compatibilizing effect of ethylene glycidyl methacrylate (E-GMA), as evidenced by an increase in viscosity, melt strength (MS), and breaking stretching ratio (BSR), thus improving the processability during film extrusion. E-GMA also decreased COC domain size and improved the interfacial interaction with PA6, which was at the basis of a higher tensile strength and strain at break compared to neat PA6/COC blends. E-GMA also significantly boosted the healing efficiency (HE), measured via fracture toughness tests in quasi-static and impact conditions. The optimal healing temperature was identified as 160 °C, associated with an HE of 38% in quasi-static mode and 82% in impact mode for the PA6/COC blends with an E-GMA content of 5 wt% (PA6COC_5E-GMA). The higher healing efficiency under impact conditions was attributed to the planar fracture surface, which facilitated the flow of the healing agent in the crack zone, as proven by fractography analysis. This work demonstrates the potential of E-GMA in fine-tuning the thermomechanical properties of PA6/COC blends. PA6COC_5E-GMA emerged as the formulation with the best balance between processability and self-healing efficiency, paving the way for advanced multifunctional self-healing thermoplastic composites for structural applications.

Schlagwörter

Stichwörter der Autor:innen

cyclic olefin copolymerfracture toughnesspolyamide 6polymer blendsrheologyself-healing

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123 Trento, Italy.
  • National Interuniversity Consortium of Materials Science and Technology (INSTM), Via Giuseppe Giusti, 9, 50121 Florence, Italy.
  • Department of Engineering, University of Palermo, Viale Delle Scienze, 90128 Palermo, Italy.

ORCID-Profile: Davide Perin, Luigi Botta, Daniele Rigotti, Giulia Fredi, Alessandro Pegoretti

Förderung

  • European Union

Zitieren

APA

Perin, D., Botta, L., Rigotti, D., Dorigato, A., Fredi, G., & Pegoretti, A. (2025). Tuning the Compatibilizer Content and Healing Temperature in Thermally Mendable Polyamide 6/Cyclic Olefin Copolymer Blends. Polymers, 17(3), 280. https://doi.org/10.3390/polym17030280

Vancouver

Perin D, Botta L, Rigotti D, Dorigato A, Fredi G, Pegoretti A. Tuning the Compatibilizer Content and Healing Temperature in Thermally Mendable Polyamide 6/Cyclic Olefin Copolymer Blends. Polymers. 2025;17(3):280. doi:10.3390/polym17030280

BibTeX
@article{Perin2025,
  author = {Perin, Davide and Botta, Luigi and Rigotti, Daniele and Dorigato, Andrea and Fredi, Giulia and Pegoretti, Alessandro},
  title = {Tuning the Compatibilizer Content and Healing Temperature in Thermally Mendable Polyamide 6/Cyclic Olefin Copolymer Blends},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {280},
  doi = {10.3390/polym17030280}
}
Kostenlos starten →