EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction Model for Flake Line Defects in Metallic Injection Molding: Considering Skin-Core Velocity and Alignment

Seungkwon Choi, Donghwi Park iD, Seungcheol Lee, Minho Song, Naksoo Kim iD

Polymers · 20.01.2025 · 17 (2) · 245

DOI: 10.3390/polym17020245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.01.2025. Verfasst von Seungkwon Choi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sogang University, Seoul 04107, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metallic injection molding combines aluminum flake metallic pigments with polymers to directly produce components with metallic luster, improving production efficiency and reducing environmental impact. However, flake line defects that occur in regions where ribs or flow paths intersect remain a significant challenge. This study proposes a velocity model that considers the flow characteristics between the surface and core layers and an alignment model that incorporates the orientation of aluminum flakes to predict appearance defects. Through this approach, the mechanisms of appearance defect formation were systematized, and the appearance defects caused by flow velocity differences between the surface and core layers, flake alignment uniformity, and reflection angles were visualized. Both prediction models demonstrated a 50% prediction accuracy, successfully identifying two out of four observed defects. This research addresses the limitations of previous prediction methods, which only considered the surface layer, by introducing a novel approach that accounts for the core layer. It is expected to contribute to reducing defects and improving quality in industries requiring high-quality metallic appearances.

Schlagwörter

Stichwörter der Autor:innen

aluminum flakesappearance defectflake line defectsmetallic injection moldingmisalignment indexskin-core interactionvelocity model

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sogang University, Seoul 04107, Republic of Korea.
  • Manufacturing Solution Division, Hyundai Motor Company, Uiwang-si 16082, Republic of Korea.

ORCID-Profile: Donghwi Park, Naksoo Kim

Zitieren

APA

Choi, S., Park, D., Lee, S., Song, M., & Kim, N. (2025). Prediction Model for Flake Line Defects in Metallic Injection Molding: Considering Skin-Core Velocity and Alignment. Polymers, 17(2), 245. https://doi.org/10.3390/polym17020245

Vancouver

Choi S, Park D, Lee S, Song M, Kim N. Prediction Model for Flake Line Defects in Metallic Injection Molding: Considering Skin-Core Velocity and Alignment. Polymers. 2025;17(2):245. doi:10.3390/polym17020245

BibTeX
@article{Choi2025,
  author = {Choi, Seungkwon and Park, Donghwi and Lee, Seungcheol and Song, Minho and Kim, Naksoo},
  title = {Prediction Model for Flake Line Defects in Metallic Injection Molding: Considering Skin-Core Velocity and Alignment},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {2},
  pages = {245},
  doi = {10.3390/polym17020245}
}
Kostenlos starten →